Maintaining the Cabinet and Remote Control
Gently wipe off dirt on the cabinet with a soft cloth.
0
If it is extremely dirty, wet a cloth in water, wring dry and use it to wipe off the dirt, followed by wiping again with a dry
0
cloth.
Pay attention to the following as the cabinet may deteriorate in condition or the paint may come off.
0
Do not wipe with thinner or benzine
0
Do not allow prolonged contact with rubber or plastic products
0
Do not spray volatile chemicals such as insecticide
0
Cleaning and Replacing the Filter
Clean the filter regularly. Using a filter without cleaning may reduce the brightness of the image. Dirt that enters the unit
may also appear as shadows on the image.
Loosen the 4 screws and remove the cover
1
The screws cannot be removed from the cover. Do not try to remove the screws from the cover by force.
0
Remove the sponge filter
2
Use a vacuum cleaner to remove dirt from the sponge filter carefully
3
Restore the sponge filter
4
Restore the cover and fasten the 4 screws
5
Air Filter
(White)
Sponge Filter (Gray)
2 3 4
1
47