JVC DLA-VS4550 Instructions Manual page 39

Zone Adjust Operation Procedure
For fine-tuning misalignments on a part of the screen after adjusting the overall screen misalignment using "Adjust
(Pixel)" and "Adjust (Fine)".
The screen can be divided vertically and horizontally into 10 sections for partial adjustments to be made.
0
A Set "Adjust Area" to "Zone"
B Select "Adjust Color" and "Adjust Pattern Color"
C Select Adjust (Fine), and press the [OK] button
The Adjustment mode is activated, and the selected adjustment pattern and Zone Adjustment window are displayed.
0
The adjustable range may be smaller depending on the pixels being adjusted on the entire screen.
0
Zone Adjustment Window
D Press the [JKH I] keys to move the cursor to the point to be adjusted
E Press the [OK] button to enter the Adjustment mode
F Use the [JKH I] keys to move and adjust the vertical and horizontal pixels of the entire zone
The adjustment setting appears at the center of the Zone Adjustment window.
0
Pixel Adjustment Setting
Cursor Position
G After adjustment is complete, press the [BACK] button twice to exit the Adjustment mode
Zone Cursor
Pixel Adjust
Zone Adjust
Position
Color A. Adjust. Color P. A. Area
COLOR LENS
GAMMA
TEMP AP.
Zone Adjust
Position
Color A. Adjust. Color P. A. Area
COLOR
GAMMA
TEMP
Position
Red
0 / 0
H 0
V 0
Back
PIC.
BACK
ADJ.
H (Horizontal)
Pixel Adjust
Red
0 / 0
0
H
V 0
Back
LENS PIC.
BACK
AP. ADJ.
8 / 5
H -31
V 7
Adjustment Pattern
Color for
Adjustment
Remote Control Operation
Guide
Adjustment Setting
39