Snooze/Display Dimmer Button/Sleep Mode/Fm Radio - iHome iWBT400 Instruction Manual

Snooze/Display Dimmer Button
To program Snooze, press and hold the Snooze/Display Dimmer Button for 2 seconds
1.
during normal operation (when no alarm is sounding).
2. Press the or
3. Press and release the Snooze/Display Dimmer Button to confirm Snooze setting. 2 beeps
will sound.
4. While the alarm is sounding, press and release the Snooze/Display Dimmer Button to
temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can be
used several times during alarm.
5. To adjust the brightness of the display, press and release the Snooze/Display Dimmer
Button during normal operation (when no alarm is sounding) to cycle through the
brightness display settings.
Sleep Mode
This unit allows you to sleep to the current sound source for a set time before turning the unit o .
1. To set Sleep time, press and release the Sleep/Clock Adjust Button as needed to cycle to the
desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF (turns the unit o ).
2. Press the or
setting is stored separately from other volume settings.
FM Radio
Extend the FM antenna for best reception.
1. Press and release the Mode Button as needed until the FM indicator icon
and current FM radio frequency appear on the display.
2. Press the or
scan for the next clear station).
3. Press the or
4. When you are through listening, press the
Buttons to select the desired snooze time (between 01 and 29 minutes).
Buttons to adjust the sleep volume on the unit. Note that the sleep volume
Buttons to tune the radio to the desired station (hold to
Buttons to adjust the volume on the unit.
Using the
Power/Alarm Reset Button to turn the unit o .
9
iWBT400