Table of Contents
Advertisement
Available languages
Available languages
PROGRAMMABLE WALL STATION
3.2 PWS-6
The PWS-6 has 6 buttons with Status-LEDs.
Front view:
CHANNEL 1
CHANNEL 2
CHANNEL 3
3
CHANNEL 4
CHANNEL 5
CHANNEL 6
Rear view:
2
OUT
3
1
IN
3.3 Mounting and Configuration
The front units PWS-4 or PWS-6 are connected with two screws to the CAN-Bus coupler PWS-C (see
page 11). All front units of a programmable wall station have to be connected in series. Front units are
daisy chained by connecting the output socket (OUT) of a front unit to the input socket (IN) of the next unit
in the chain.
NOTE:
Connecting sockets of the same type (IN to IN or OUT to OUT) is not permissible.
8
Owner's manual
1
Freely configurable function keys
2
2
Label field
3
Status-LEDs for the function keys (1)
1
1
Connector for the PWS-C or input socket (IN) for connecting the
PWS-6 to the previous front unit in the chain
2
Output socket (OUT) for connecting the PWS-6 to the next front
unit in the chain
3
Mechanical lock for the PWS-C plus cover
3
Advertisement
Table of Contents
