Channel; Pws Front Unit Pws-4/Pws-6; Pws-4 - Electro-Voice PWS-4 Owner's Manual

3 PWS Front Unit PWS-4/PWS-6

PWS-4 and PWS-6 are front units of the modular PWS system. They are meant for installation in a US-
type wall box. Typical applications are: source selection, volume control and preset-switching.
All controls and indicators of the front units are freely configurable via IRIS-Net™. Individually labeling the
controls and indicators according to their assign functions is possible after removing the label field cover.
The front units PWS-4 or PWS-6 are being used in combination with the CAN-Bus coupler PWS-C. Up to
three front units can be operated on a single PWS-C.

3.1 PWS-4

The PWS-4 has in total 6 buttons, with the upper four buttons having a separate Status-LED, each. The
two lower buttons can be used as Up/Down buttons. The set parameter status is signaled via LED-chain.
Front view:
2

CHANNEL 1

CHANNEL 2
1 3
CHANNEL 3
CHANNEL 4
4
5 VOLUME
Rear view:
2
OUT
3
1
IN
1 Status-LEDs for the function keys (3)
2 Label field
3 Freely configurable function keys
4 Up/Down buttons
5 LED-chain indicates a parameter's value that has been changed
using the Up/Down buttons (4)
1 Connector for the PWS-C or input socket (IN) for connecting the
PWS-4 to the previous front unit in the chain
2 Output socket (OUT) for connecting the PWS-4 to the next front
unit in the chain
3 Mechanical lock for the PWS-C plus cover
3
PROGRAMMABLE WALL STATION
Owner's manual 7