Table of Contents
Advertisement
Programming
Setting the clock
Once you have connected the device to the power supply,
the display shows „00:00" on. Without setting the oven is
not working.
Set time of day
• „0:" flashes, when you turn on the device the first time.
• With the +/–-buttons you can adjust the hours.
• Press the
-key to change into minutes-mode.
• Now set the minutes with the +/–-buttons.
• Either press the time button again or wait 5 seconds. Then
the time is stored.
Hint
• When there's an interruption of the power circuit, the clock
resets itself to 0.
Choose type of heating
• Turn the oven on.
• Now you can choose type of heating by pressing the
+/--buttons.
• First, the device proposes the default temperature.
• Press the temperature button (for 3 seconds) then use the
+ / - keys to adjust the temperature.
Hint:
When you press
button for 3 seconds while
the oven is working, you can also change the type
of heating instantly. You can modify the tempera-
ture, too.
• When you heat up the oven and want to check the progress
(current temparature), press the
Plus button at the same time. While pressing, the display
will show the current value.
Setting the cooking time
While the oven is working, you can set a cooking time.
• Press the time-button
.
• Now set up the duration value by selecting the +/–-buttons.
• The icon
will appear and the clock icon flashing.
• Press the time-button again or wait 3 seconds to save the
setting.
Hint:
In conjunction with the core temperature sensor,
this function is not working.
14
Delayed start
If you go at 8 clock out of the house to come back 12:30
clock during which time a cake to be baked, you can set:
• Press the time button
example, 1 hours.
• Press the + / –-key to enter the desired target end time.
For example: you want a cooking time of 1 hour and this
should end at 12:30 clock.
• Press again the key time. The oven remains until the de-
layed start time off.
• The symbols of the cooking and target end times when the
furnace starts alternately flash in the display.
Minute minder / alarm function
If you want to go, for example, a dough and need a remin-
der, you can use the built-in alarm function.
• Do this, press and hold the button
A bell icon appears on the display.
• Now use the +/–- keys to set the desired time. (e.g. 5 minu-
tes)
• Now press the button
When the set time has elapsed, an audible signal.
temperature + the
Child lock / key lock
Lock:
• Press the
second. Then, the machine will beep and a key icon will
appear in the display.
Unlock:
• Repeatedly press and hold (about 3 seconds), this key com-
bination leads to release the key lock.
Hint:
This function allows you to select only when the
oven function and temperature was set.
. The desired cooking time is, for
again to confirm the setting.
and
buttons simultaneously for about 1
Hint:
This lock also works when the oven is in operation.
for about 2 seconds.
Advertisement
Table of Contents
