BRP Evinrude E-TEC 40 Operator's Manual page 87

Components Covered
The emission-related warranty covers all components whose failure would increase an engine's emis-
sions of any regulated pollutant, including the following listed components:
For exhaust emissions, emission-related components include any engine parts related to the
1.
following systems:
– Air-induction system
– Fuel system
– Ignition system
– Exhaust gas recirculation systems
2. The following parts are also considered emission-related components for exhaust emissions:
– After-treatment devices
– Crankcase ventilation valves
– Sensors
– Electronic control units
3. The following parts are considered emission-related components for evaporative emissions:
– Fuel tank
– Fuel cap
– Fuel line
– Fuel line fittings
– Clamps*
– Pressure relief valves*
– Control valves*
– Control solenoids*
– Electronic controls*
– Vacuum control diaphragms*
– Control cables*
– Control linkages*
– Purge valves
– Vapor hoses
– Liquid/vapor separator
– Carbon canister
– Canister mounting brackets
– Carburetor purge port connector
Emission-related components also include any other part whose only purpose is to reduce
4. emissions or whose failure will increase emissions without significantly degrading engine/
equipment performance.
*As related to the evaporative emission control system
Limited Applicability
As a certifying manufacturer, BRP may deny emission-related warranty claims for failures that have been
caused by the owner's or operator's improper maintenance or use, by accidents for which the manufac-
turer has no responsibility, or by acts of God. For example, an emission-related warranty claim need not
be honored for failures that have been directly caused by the operator's abuse of the engine/equipment
or the operator's use of the engine/equipment in a manner for which it was not designed and are not at-
tributable to the manufacturer in anyway.
Product Warranty Information

85