BRP Evinrude E-TEC 40 Operator's Manual page 13

Hang Tag
All outboards are shipped with the following
hang tag attached.
Remote Control Labels
All remote controls have the following labels
attached.
WARNING
Operator's
Guide
Locate, read and
understand operator's
guide and all warnings.
Failure to do so could
result in serious injury.
Shift position
Reverse / Neutral / Forward
Operator's
Guide
355926
Attach engine shut-off cord
(Lanyard) to operator.
WARNING
008488
Important On-Product Labels

Hang Tag –
Pontoon Series Outboards
WARNING
Pontoon Series outboards are intended
to be installed ONLY on pontoon boats.
Boat hulls other than pontoons may
experience instability
torque if operated above certain speeds.
If any adverse conditions occur, reduce
throttle and/or adjust tilt angle to main-
tain control. If you experience boat insta-
bility and/or high steering torque, see
your Dealer to correct these conditions.
If the bow of the boat plows the water at
high speeds, the boat may bow steer or
spin suddenly, possibly ejecting or oth-
erwise seriously injuring occupants.
All Pontoon Series outboards are shipped
with the following hang tag attached.
and steering
357258
11