BRP Evinrude E-TEC 40 Operator's Manual page 80

Product Information
Displacement
Engine Type
Full Throttle Operating Range
(1)
Power
(2)
Idle RPM in Gear
Idle RPM in Neutral
(2)
Ignition Timing
Emission Control System:
(2)
per SAE J1930
(2)
Fuel Requirements
Oil
Warning Signals
(3)
Battery, Minimum
(2)
Spark Plug
Fuses
Fuel Filter (12 to 15 micron)
Battery Charging
Gearcase – Lubricant
– Capacity
Power Trim/Tilt
Propeller
Weight
Sound at Driver's Ear
(LpA) ICOMIA 39.94
Transom Height
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
(2) Emission Control Information.
(3) Use a 800 CCA (1000 MCA) battery when operating in temperatures below 32°F (0°C).
(4) Use Evinrude HPF Pro Gearcase Lubricant for high performance outboards and commercial
applications. Evinrude HPF Pro Gearcase Lubricant delivers exceptional durability and reliability and
promotes long gearcase life in marine use.
78
Specifications
60 H.O., 65, 75, 90 Models
79.1 cu. in. (1296 cc)
In-line, 3 Cylinder, Two-Cycle, E-TEC
60 H.O. – 5000 to 5500 RPM
65 HP – 5000 to 5500 RPM
75 HP – 5000 to 5500 RPM
60 Jet / 90 HP – 5000 to 5500 RPM
60 H.O. – 60 HP (44.13 kw) @ 5500 RPM
65 HP – 65 HP (47.8 kw) @ 5000 RPM
75 HP – 75 HP (55.16 kw) @ 5000 RPM
60 Jet / 90 HP – 90 HP (66.19 kw) @ 5000 RPM
700 ± 50
(2)
600 ± 50
Not Adjustable
ECM, E-TEC (Engine Control Module, E-TEC)
87 Pump Posted AKI (90 RON)
– Refer to
– Lubricant TC-W3 NMMA-certified oil or Evinrude XD100 oil
– Refer to
– Capacity 2.4 qt. (2.3 l)
Controlled by the outboard's EMM
640 CCA (800 MCA) 12 volt or
800 CCA (1000 MCA) 12 volt below 32°F (0°C)
Refer to Parts Catalog or engine ECI Label
P/N 967545 – Refer to
P/N 5007335 – In-line Replaceable
25-Amp, Fully Regulated
(4)
Evinrude HPF–Pro
L Models – 32.1 fl. oz. (950 ml)
X Models – 32.8 fl. oz. (970 ml)
– Fluid Evinrude Biodegradeable Trim & Tilt Fluid, P/N 763439
– Capacity 21 fl. oz. (622 ml)
Refer to
L Models – 320 lbs. (145 kg)
X Models – 335 lbs. (152 kg)
76.8 dB(A)
L Models – 19 1/2 to 20 in. (495 to 508 mm)
X Models – 24 1/2 to 25 in. (622 to 635 mm)
Fuel Requirements
Oil Requirements
Fuse
Propeller Selection
on page 21
on page 18
on page 60
on page 74