BRP Evinrude E-TEC 40 Operator's Manual page 41

Engage
1) Move the tilt/run lever to TILT position.
2) Tilt the outboard UP.
3) Push tilt support bracket to "lock" position.
Flip the tilt lock lever down.
4) Lower the outboard until the tilt lock lever
rests solidly on the stern brackets.
1
1. Tilt support bracket – lock position
Tilting and Trim – Manual Tilt Models

Disengage
1) Move tilt/run lever to RUN position.
2) Tilt the outboard UP.
3) Pull tilt support bracket to "unlock" posi-
tion. Flip the tilt lock lever up.
4) Lower the outboard to operating position.
1
1. Tilt support bracket – unlock position
DR3937
DR3938
39