BRP Evinrude E-TEC 40 Operator's Manual page 31

Fuel Economy
Fuel economy can vary depending on boat
load, hull design, and throttle setting. When
boat reaches top speed, throttle back from
FULL SPEED to a lower throttle setting. You
will save fuel with a minimal loss of speed.
Adjustments
Throttle Friction
WARNING
Tighten knob only enough to hold throt-
tle at a constant engine speed. Over
tightening will prevent quick throttle
change in case of emergency.
Adjust the throttle friction knob to reduce the
effort required to hold a throttle setting.
1. Throttle friction screw
Tiller Handle Angle
Tiller handle angle can be raised or lowered
by turning the adjustment screw under the
handle.
1. Adjustment screw
Trim/Tilt Switch
If equipped, the trim/tilt switch is located in the
end of tiller handle. Press switch as indicated
for UP and DOWN operation.
1
005099
1. Trim/tilt switch UP
2. Trim/tilt switch DOWN
1
1
2
Operation

005108
005107
29