Siemens VersiCharge AC Quick Start Installation Manual page 15

APPENDIX B – System Operation/Faults
Operating and Fault Light States After a Charger has been Added
Display
Normal Operation
Applicable to Commercial units,
only if RFID is enabled.
Applicable to Commercial units,
if RFID is enabled.
Lights up white
LED off
Lights up white
Lights up white
Flashes white
Lights up red
Lights up orange
Description
Charger is locked.
Charger is unlocked
Charging station is ready
Charging Paused.
Vehicle connected
Charging in progress
After switch on, the charger will
go to Access Point mode
No Wi-Fi
Charger is connected to router.
Weak Wi-Fi.
VersiCharge™ AC Electric vehicle charging station
Action
Pass RFID card in front of reader to unlock and begin
charging.
Enable RFID authentication. To unlock pass an RFID
card over the RFID reader.
NOTE: The charger is in the unlocked state by default.
Charging can be resumed through the Mobile App.
Connect PC or mobile device for commissioning, charger
is ready to be added to the account
Check the router
Strengthen the Wi-Fi.
16