Siemens VersiCharge AC Quick Start Installation Manual page 13

VersiCharge™ AC Electric vehicle charging station
Maintenance
While there is no maintenance for the internal works of the VersiCharge, the exterior
does require some basic, common sense maintenance. The following maintenance
can be performed by the owner/user. All other service must be conducted by
qualified personnel.
If there is any damage to the charger, contact your supplier.
General exterior maintenance is recommended to be performed every six months
depending on the environment. In harsh environments, maintenance should be
performed more often.
General exterior maintenance
Regular cleaning is recommended to avoid accumulation of debris/dust/dirt on or
around the unit. Wipe surfaces with a soft cloth dampened with water, or for
harder to removed marks, use an alcohol based cleaner. Do not spray with high
pressure cleaning hoses or use abrasive chemicals.
General external checks
Check for cuts, cracks, damage, and debris. If debris is present, remove it. If you
find damage, contact your supplier.
Check for damage and corrosion. If present, contact your supplier.
Check the HMI for damage/signs of faded color that is clearly visible.
Ensure there is no debris or damage inside or around the cable, cable holder and
connector/plug. If present, remove debris and/or notify the supplier of any damage.
Check the connector/plug pins for any signs of corrosion and contact the supplier,
if there is any damage to the pins.
Check for snow buildup around the VersiCharge and clear the area around the
VersiCharge. This should be checked daily in areas with high snowfall.
14