Table of Contents
Advertisement
SPD User's Manual
What you can do with the system:
•
Remote equipment power source management over TCP/IP networks, including user equipment reboot-
ing, and permanently user power source turn on/off. Schedule power reboots or power source on/off
events monthly, weekly, daily or at any time. Reboot power source to equipment when a network connec-
tion is lost.
•
Monitoring AC Power Consumptions and sending warning messages when the aggregated AC draw from
a system is crossed predefined threshold.
•
Remote control anywhere by emailing. Via emails, you are able to manage the systems or user commu-
nication equipment power sources when LAN access is impossible. Via emails, you can send user data to
the NP control commands such as rebooting user power source. Reply emails are sent after the system
intercepts incoming emails so that you are informed with the operation status.
•
AutoPing and reboot user equipment. Connect your system to a power outlet and assign the system net-
work IP address or URL. The NP system will ping the user equipment Periodically (in every 15 seconds). If
the user equipment stops responding the ping request, the equipment will reboot the power.
•
Scheduling AC outlet power cycling periodically or per weekly planner. Each outlet can be programmed
with it's own timer.
Front and Back Panel
Xtreme Power Conversion Corporation
Illustration of Typical Application
SPD-0215 Front Panel
Power Distribution Unit
Page 4
Advertisement
Table of Contents
