Xtreme Power Conversion SPD-0215 User & Installation Manual page 23

Switched
Table of Contents

Advertisement

SPD User's Manual
Power Distribution Unit
Fallback to static IP (if DHCP failed):
Define a static IP address. If DHCP is disabled on the system, there is no DHCP server running on a network, or a
DHCP server refuses IP offering, you have the option to whether either allow the system to use a static IP address
or not.
Static IP Address:
A static IP Address is never changed. This IP address will be used if a DHCP server IP has no IP offered or DHCP
automatic IP address is disabled.
Subnet Mask:
Defines a static subnet mask that is a part of your static network address settings. This entry is for your IP network
class, which is distinguished by using a subnet mask.
Gateway IP address:
Specifies a gateway IP address that is a part of your static network address settings. This is your router's IP address.
Set DNS Server IP manually:
Specifies a DNS Server IP manually.
Primary DNS IP:
Specifies a priamary DNS IP address.
Secondary DNS IP:
Specifies a secondary DNS IP address.
HTTP Port Number:
Specifies a HTTP port number. Default value is 80.
Telnet Port Number:
Specifies a Telnet port number. Default value is 23.
POP3 Port Number:
Specifies a POP3 port number. Default value is 110.
SMTP Port Number:
Specifies a SMTP port number. Default value is 25.
Incoming Email POP3 Server:
Specifies POP (incoming Email) server address. The system supports POP3 Internet Email Protocols, not web based
Email services. "61.129.42.78" and "pop.sina.com" are examples of POP Email servers. Make sure that the POP
server you use does not require log on secure password authentication.
Helpful Info: Use the command "getmail" to immediately check incoming emails.
Outgoing Email SMTP Server:
Specifies SMTP (outgoing Email) server address. This server will be used for you to send outgoing (reply) Emails.
"61.129.42.78" and "smtp.sina.com" are examples of SMTP Email servers. NP supports SMTP log on secure pass-
word authentication option.
Helpful Info: use the command "smtp lalala" to immediately send emails.
Xtreme Power Conversion Corporation
Page 23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spd-0815Spd-1615

Table of Contents