Table of Contents
Advertisement
SPD User's Manual
Power Distribution Unit
System Access Setup Menu
System Access Control Menu (Web Page)
System(or Site) name:
Assign a system name, sometimes referred as site or device name.
Date and Time:
Enter calendar date and real-time clock.
Serial Port Mode:
Configure the Local Master Port to interface type: either to a serial RS-232 port on your work station or an external
Modem device. An external Modem device is typically equipped with a DCE (Data Communication Equipment)
terminal connector. Since the system's Local Master Port and Modem device ports are not complementary, you
need to use a NULL Modem cable with both male connectors. For information about connecter pin assignment,
please see appendix A.
Modem Startup String:
Define an external Modem control command string that is sent from the system to an external modem device pe-
riodically (in every 15 minutes). If you do not need to define the control string, leave the entry field empty.
Web Access:
Enable or disable web access to the system. Default to enable.
Xtreme Power Conversion Corporation
Page 19
Advertisement
Table of Contents
