Tcp/Ip Network Configuration Menu - Xtreme Power Conversion SPD-0215 User & Installation Manual

SPD User's Manual Power Distribution Unit

TCP/IP Network Configuration Menu

TCP/IP Network Configuration Menu (Web Page)
Obtain IP using DHCP:
Enable or disable DHCP. The purpose of using DHCP (Dynamic Host Configuration Protocol) is to assign dynamic IP
addresses to a computer or a network device on a network. There must be a DHCP server on a network running
and the server must permit an assigned computer or network device to be on the LAN. If this option is disabled,
the system will not send DHCP requests to a network.
Xtreme Power Conversion Corporation Page 22