Download Print this page

Cocraft 18-3282 Quick Start Manual

Advertisement

Available languages
  • EN

Available languages

Quick Links

15 W Soldering Iron
Art.no 18-3282, 40-8220
Please read the entire instruction manual before
use and save it for future reference. We reserve
the right for any errors in text or images and for
making any necessary technical changes to this
document. If you should have any questions
concerning technical problems please contact our
Customer Services.
Safety
The mains lead should be checked regularly.
Never use the product if the mains lead or plug
is damaged.
The power lead must be changed if damaged.
This is to prevent the risk of electric shock
or fire and should only be carried out by
the manufacturer, qualified service facility or
qualified technician.
WARNING – FIRE HAZARD!
The tool can become a fire hazard if used improperly.
Please take the following into consideration:
Be careful when using the tool in the vicinity of
flammable materials.
Do not hold the tool on the joint for
a long time.
Never use the tool in an explosive atmosphere.
Heat can spread and ignite flammable
materials which are not within sight.
Let the tool cool sufficiently before putting it
away for storage.
Never leave the tool unattended.
Never expose the tool to rain or moisture.
GREAT BRITAIN • CUSTOMER SERVICE
tel. 020 8247 9300 web: www.clasohlson.co.uk
e-mail: customerservice@clasohlson.co.uk
Operation
1. First check that the soldering iron's rated
voltage conforms to your mains voltage.
2. Check that the tip of the soldering iron
is securely fastened and that the screws
are tight.
3. Plug the power lead into a wall socket.
4. Check that the tip's contact surfaces are clean
and undamaged.
5. "Tin" the tip by heating it and covering it in solder.
6. Use the soldering iron to heat up the soldering
surfaces, not the solder.
7. Apply a sufficient amount of solder to the joint
and then let the joint cool off.
8. Clean the tip with a wet sponge while it is
still warm.
9. Disconnect the soldering iron and let it
cool down.
Responsible disposal
This symbol indicates that this
product should not be disposed
of with general household waste.
This applies throughout the entire
EU. In order to prevent any harm
to the environment or health
hazards caused by incorrect waste
disposal, the product must be
handed in for recycling so that
the material can be disposed of
in a responsible manner. When
recycling your product, take it
to your local collection facility or
contact the place of purchase.
They will ensure that the product is
disposed of in an environmentally
sound manner.
Specifications
Rated voltage
230 V AC, 50 Hz
Power
15 W

Advertisement

loading

Summary of Contents for Cocraft 18-3282

  • Page 1 15 W Soldering Iron Operation 1. First check that the soldering iron’s rated Art.no 18-3282, 40-8220 voltage conforms to your mains voltage. Please read the entire instruction manual before 2. Check that the tip of the soldering iron use and save it for future reference. We reserve is securely fastened and that the screws...
  • Page 2 Lödpenna 15 W Användning 1. Kontrollera först att lödpennans märkspänning Art.nr 18-3282, 40-8220 överensstämmer med nätspänningen. Läs igenom hela bruksanvisningen före användning 2. Kontrollera att lödpennans spets sitter fast och och spara den sedan för framtida bruk. att skruvarna är ordentligt åtdragna.
  • Page 3 Loddepenn 15 W Bruk 1. Kontroller først om produktets krav til spenning Art.nr. 18-3282, 40-8220 stemmer overens med nettspenningen. Les brukerveiledningen nøye før produktet tas 2. Sjekk at spissen er godt festet og at skruene i bruk, og ta vare på den for framtidig bruk.
  • Page 4: Tekniset Tiedot

    Juotoskynä 15 W Käyttö 1. Varmista ensin, että juotoskynän kilven jännite Tuotenro 18-3282, 40-8220 vastaa pistorasian jännitettä. Lue käyttöohjeet ennen tuotteen käyttöönottoa. 2. Varmista, että juotoskynän kärki on kunnolla Säilytä käyttöohjeet tulevaa tarvetta varten. kiinni ja että ruuvit ovat kireällä. Pidätämme oikeuden teknisten tietojen muutoksiin.
  • Page 5: Hinweise Zur Entsorgung

    Lötkolben 15 W Handhabung 1. Zunächst überprüfen, ob die Nennspannung Art.Nr. 18-3282, 40-8220 des Lötkolbens mit der Netzspannung übereinstimmt. Vor Inbetriebnahme die komplette Bedienungsanleitung durchlesen und aufbewahren. 2. Überprüfen, ob die Spitze des Lötkolbens Irrtümer, Abweichungen und Änderungen festsitzt und die Schrauben ordnungsgemäß behalten wir uns vor. Bei technischen angezogen sind.

This manual is also suitable for:

40-8220