Cable Grounding - Safegate Group SL-HF-I Manual

Airfield Lighting
Manual
Ref: SL-HF-I; SL-HT-I
2.2.1

Cable Grounding

For safety reasons the fitting shall be grounded with the protective earth (PE) ground
wire (green/yellow wire). It is recommended to use a separate fuse and a residual
current device on the circuit. For calculation of the fuse size, calculate with the given
power consumption for used fitting. The mains cable is a standard 3x1.0mm
and has a length of 1 m.
FIGURE 6 – TERMINALS AND HEAD SHRINKABLE SLEEVES
Page 8 of 16
Safegate Group
Date: September 2014
Version: 1.3
2
cable