Using Bluetooth ® Interface To Pair, From Windows - HomeAgain Universal Worldscan Reader Plus User Manual

982005624300245
USB Connected!
Note 6 – Once the USB cable is connected, the reader is automatically powered on and it will
remain activated until the cable is disconnected. The reader will be able to read a microchip if
sufficiently charged batteries are inserted. With depleted batteries, the reader will not be able to
read a microchip, but will remain on and can only communicate with computer.
Note 7: The reader cannot read microchips without batteries inserted. Therefore it is not possible to
read a microchip, although the other functions are fully active.
4.2 Using Bluetooth
Alternately, you can pair the reader using Windows Control Panel.
Find below the instructions for pairing with Windows 7:
1 Open Windows' Control
Panel
2 In "Hardware and Sound"
section, select "Add a
device"
3 Switch-on the reader
and wait until the reader
appears in the device list
as following:
4 Select the appropriate
reader and click with
right button
User Manual
Plug the other extremity of the USB cable into a USB port on your
3
computer.
4
A message is displayed on screen
interface to pair, from Windows
®
NOTE: Your reader may appear as a Bluetooth headset.
8