3.4.2
Read range performances
Figure 3 illustrates the reading zone of the reader, within which microchips can be successfully
detected and read. Optimum read distance occurs depending upon the orientation of the
microchip. Microchips and implants read best when positioned as shown below.
Figure 3 - Optimum Read Distance Microchip Orientation (position 1, 2, 3 and 4)
Typical read distances will vary when reading different types of microchips.
3.5 Memory management
The UWSR+ can store up to 3000 IDs, each associated with a time/date stamp, in its internal memory
and transmit them to a personal computer via an USB cable or wirelessly using Bluetooth
The tool "Microchip Management Software" allows you to enable/disable the memory storage (refer
to the "UWSR+ Microchip Management Software User Guide"). By default, the memory storage is
DISABLED.
When memory is enabled and a microchip is read, the UWSR+ displays the number of microchips
stored in memory, above the microchip number, as shown in picture below:
3.6 Temperature measurement
The UWSR+ can read and display the Microchip Temperature™ when reading microchips with
temperature sensing
The Microchip Temperature™ is displayed above the microchip number as shown in picture below:
Microchip Temperature™ range is from 33ºC (91.4ºF) to 43ºC (109.4ºF). If the temperature is below or above this range, it will display
2
"TEMP BELOW RANGE" OR "TEMP ABOVE RANGE".
User Manual
985005624300245
implants from Allflex or Destron Fearing.
2
MEM:0008
.
®
6