Adjusting Air Flow Direction - Canvac Q Air C Series User Manual

adjuSTINg aIR FlOW dIRECTION

lever for
manually
adjusting
air direction
sideways
WarninG!
• When you start the unit, there is a 10 second delay before the horizontal "grid" moves.
• do not adjust the horizontal grid manually. Programme synchronisation is lost or the unit may sustain damage.
• always ensure that the air louvre is open when the unit is running.
HORIzONTal aIR lOuVRE
Use the remote control (SWING/DIRECT) to adjust air flow direction.
The horizontal louvre changes direction by 6 degrees with each press of the button, or automatically
runs upwards and downwards.
IMPORTaNT!
do not use your hands to move the horizontal air louvre. This can damage the electric motor.
VERTICal aIR lOuVRE
Adjust air flow direction manually by sliding the adjusting lever sideways (see figure below).
IMPORTaNT!
Do not insert fingers in the air intake. This can result in injury/damage.
REMOVINg
THE aIR lOuVRE
The air louvre can be removed, e.g. for cleaning the air outlet.
To do this, remove the locking pins in the middle of the air louvre blade.
IMPORTaNT! The unit must be turned off and disconnected from the power
supply when doing this.
29
GB