The Remote Control; Fitting New Batteries; Technical Data - Canvac Q Air C Series User Manual

THE REMOTE CONTROl

8m
IMPORTaNT!
• Ensure that curtains, doors, etc. do not block the signals from the remote control to the indoor unit.
• The remote control must not be exposed to moisture/liquid.
• The remote control must not be exposed to great heat or direct sunlight.
• The indoor unit's infrared receiver must not be exposed to direct sunlight. This can affect its correct operation.
• If other items of electrical apparatus react to the remote control, move them.

FITTINg NEW baTTERIES

The remote control has two aaa batteries beneath the cover on its reverse.
1. Remover the cover by pressing and pushing downwards.
2. Remove the old batteries and put in the new. Ensure that (+) and (-) are in the right places.
3. Refit the cover.
REMOTE CONTROl TECHNICal daTa
Remote control model
Volts (batteries)
Signal reception radius
• you can use the remote control within an 8 metre radius of the indoor unit.
• Aim the remote control at the indoor unit until you hear a beep confirming reception.
Rg57a4/bgEF
3.0 V (2 aaa batteries)
8 metres
25
GB