The Remote Control's Buttons - Canvac Q Air C Series User Manual

THE REMOTE CONTROl'S buTTONS

1
ON/OFF
2
MOdE
TEMP
3
FaN
4
SlEEP
TuRb O
5
AIR
6
7
SHOR T
Cu T
8
TIMER
ON
9
TIMER
OFF
10
SW IN g dI R ECT
11
lE d 12
1. ON/OFF
The machine starts when you press once and stops when you press again.
2. MOdE (p. 10)
With each press, the mode changes in the following order:
auTO COOl
3. FaN SPEEd
Fan speed has 4 modes:
(auto means that the unit itself determines the required fan speed.)
auTO lOW MEdIuM HIgH
4. SlEEP (p. 12)
activates/deactivates the SlEEP function.
5. TuRbO (p. 12)
activates/deactivates the TuRbO function.
6. Temperature setting
Raises/lowers the temperature.
7. SHORT CuT (p. 13)
Saves your own standard settings.
8. TIMER ON (pp. 14/15)
Starts the timer and, with each push, increases the time in 30-minute steps
or, after 10 hours, in 1-hour steps.
9. TIMER OFF (pp. 14/15)
Starts the timer and, with each push, increases the time in 30-minute steps
or, after 10 hours, in 1-hour steps.
10. SWINg (p. 11)
Press to have the horizontal air louvre swing automatically.
11. dIRECT (p. 11)
Press to have the horizontal air louvre change position. Each press adjusts
air louvre angle by 6 degrees.
12. lEd (p. 13)
activates/deactivates the indoor unit's display.
further information on the functions is given on the
pages referred to after each button.
26
dRy HEaT FaN