Radio - Pioneer SPH-20DAB Operation Manual

NOTE
Press and hold / then release to seek an available service. Scanning stops when the unit receives a
service.

Radio

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
Receiving preset stations
1
Press to select [RADIO].
2
Press to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
3
Press or .
TIP
The / buttons can be also used to select a preset station when [SEEK] is set to [P.CH] in the
FUNCTION settings (page 22).
Best stations memory (BSM)
The six strongest stations are stored then select the channel by pressing / .
1
After selecting the band, press and hold
2
Press to select [FUNCTION], then press
3
Press to select [BSM], then press
To seek a station manually
1
After selecting the band, press / to select a station.
Press and hold / then release to seek an available station. Scanning stops when
the unit receives a station. To cancel seek tuning, press / .
NOTE
[SEEK] needs to be set to [MANUAL] in the FUNCTION settings (page 22).
to display the main menu.
to confirm.
to confirm.
- 12 -