Audio Settings - Pioneer SPH-20DAB Operation Manual

AUDIO settings

Menu Item
EQ
[SUPERBAS], [POWERFUL],
[NATURAL], [VOCAL], [APP EQ]*,
[CUSTOM1], [CUSTOM2], [FLAT],
[VIVID], [DYNAMIC]
* [APP EQ] is displayed when the
preset equalizer curve that is not
available in the unit has been set
from Pioneer Smart Sync.
FADER*1
BALANCE
SUB.W*2
[Y], [N]
D.BASS
[OFF], [LOW], [HIGH]
LOUDNES
[OFF], [LOW], [MID], [HIGH]
SLA
[+4] to [–4]
Description
Select the preset equalizer curve.
• You can only customise the equalizer curve by
Pioneer Smart Sync (page 17).
Adjust the front and rear speaker balance.
• You can adjust the fader by pressing
Adjust the left and right speaker balance.
• You can adjust the balance by pressing
Set to [Y] when using a subwoofer speaker.
Boost the bass level dynamically to offer an
effect as if a subwoofer was added to the system.
Compensate for clear sound at low volume.
Adjust the volume level for each source except
FM.
Each of the below combinations are set to the
same setting automatically.
• When making a USB connection, set USB,
iPhone and APP.
• When making a Bluetooth connection, set BT
AUDIO, iPhone and APP.
- 23 - - 23 -
or .
or .