Pioneer SPH-EVO93DAB-208 Operation Manual

Pioneer SPH-EVO93DAB-208 Operation Manual

Rds av receiver

Advertisement

Quick Links

SPH-EVO93DAB
RDS AV RECEIVER
Operation Manual

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer SPH-EVO93DAB-208

  • Page 1 SPH-EVO93DAB RDS AV RECEIVER Operation Manual...
  • Page 2: Table Of Contents

    Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
  • Page 3 ■ External component ..............83 ■ Settings..................85 Displaying the setting screen ........................85 System settings ..............................85 Theme settings..............................95 Audio settings ..............................96 Video settings ..............................100 Communication settings ..........................102 ■ Favourite menu ............... 104 ■ Other functions............... 105 ■...
  • Page 4: Precaution

    • If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorised Pioneer - 4 -...
  • Page 5 • If you notice smoke, a strange noise or odour from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorised Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
  • Page 6 CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. • To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver. •...
  • Page 7 • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
  • Page 8 • A shatterproof film is attached to the unit's display. This film cannot be taken off or replaced with an alternative film. There may be glue on the edge of the film. However, this does not affect the usability of this unit. Notes on internal memory •...
  • Page 9: Parts And Controls

    Parts and controls Main unit Touch to display the home menu screen. Touch and hold to power off. To power back on, touch any button. Touch to activate the voice recognition mode such as Siri® when the iPhone is connected to the unit via Bluetooth or USB. Touch and hold to display mobile device search or select screen.
  • Page 10: Basic Operation

    Basic operation Remote control The remote control is sold separately. For details concerning operations, see the remote control manual. Starting up the unit Start the engine to boot up the system. The [Select Program Language] screen appears. NOTE From the second time on, the screen shown will differ depending on the previous conditions. Select the language.
  • Page 11 NOTE Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 106). Switching the speaker mode To change the speaker mode, you need to restore this product to the default settings. Restore the default setting (page 106).
  • Page 12 Appears when all characters are not displayed on the display area. If you touch the key, the rests are scrolled for display. NOTE This function is available only when you stop your vehicle in a safe place and apply the handbrake. Appears when items cannot be displayed on a single page.
  • Page 13 Deletes the input text to the left of the cursor one letter at a time. Enters a space. Switches between alphabet and numbers/symbols. Switches between capital and lower case letters. Home menu screen Widget (page 18) Touch to see the selected source/application. Customising the widget (page 18) When you finish customising, touch Favourite source/application area...
  • Page 14 Favourite radio stations (page 14) Suggested radio stations (page 16) Customising the home menu screen NOTES • The layout of the widgets and favourite icons on the home menu screen is saved for each mobile device connected via Bluetooth. The layout changes depending on the mobile device that is connected to this unit.
  • Page 15 Displaying the favourite radio stations screen Touch then swipe up on the screen. Swipe down on the screen when you finish. Favourite radio stations screen Favourite radio stations Touch to make changes to the selected radio station. List of favourite radio stations Touch to select the favourite radio station from the list screen (page 15).
  • Page 16 Available radio stations Touch to tune in to the selected radio station. Suggested radio stations This unit suggests radio stations to you according to your frequently listened music and radio stations. Important To use the suggested radio stations function, you may need to connect this unit to the Internet via a Wi- Fi network and set [Suggestions] (page 85) to [On].
  • Page 17 To reset the displayed suggested radio stations, it is necessary to restore all settings to the default settings in [Restore Settings] in (page 89). List screen Available radio stations Touch to tune in to the selected radio station. Notification Notification displays the notifications from the connected iPhone or smartphone (Android™) and sports information registered on CarAVAssist.
  • Page 18 Notification screen Received notifications Touch to display the details of the notification. Widget Widgets enable you to see your favourite sources and application information on the home menu screen and access shortcuts to them. Customising the widget NOTE This function is available only when you stop your vehicle in a safe place and apply the handbrake. Touch Touch and hold the widgets area.
  • Page 19 Widget area To rearrange the widgets, drag them to the desired locations. To remove a widget, drag the widget to Available source/application lists for the widgets Flick left/right to switch between widget lists. Adjusts the size of the widgets Touch a corner of the selected widget and drag it to adjust the size. You can fit up to four widgets in the widgets area by adjusting their size.
  • Page 20: Bluetooth

    Bluetooth® Bluetooth connection Turn on the Bluetooth function on the device. Touch then swipe left on the screen. Touch then Touch [Connection]. Touch The unit starts to search for available devices, then displays them in the device list. Touch in the list. If you touch the device name, the Wi-Fi connection for Apple CarPlay or Android Auto is established.
  • Page 21 CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Menu Item Description [Auto Connect] Select [On] to connect the last connected Bluetooth device [On] [Off] automatically when using the hands-free phone function. NOTE If two Bluetooth devices were connected the last time, the two devices are connected to this product automatically in the order...
  • Page 22 Hands-free phoning To use this function, you need to connect your mobile phone to this product via Bluetooth in advance (page 20). CAUTION For your safety, avoid talking on the phone as much as possible while driving. Making a phone call Touch then swipe left on the screen.
  • Page 23 The following items are displayed. • Name of the current mobile phone • List number of the current mobile phone • Reception status of the current mobile phone • Battery status of the current mobile phone If you connect two mobile phones to this product at the same time, you can switch between the mobile phones using the switch devices key.
  • Page 24 Using the preset dial lists ▶Registering a phone number You can easily store up to six phone numbers per device as presets. Touch then swipe left on the screen. Touch [Phone]. Touch On the [Phone Book] screen, touch the desired name to display the contact’s phone number.
  • Page 25 NOTE When two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed. Voice recognition function (for iPhone) By connecting your iPhone to this product, you can use the voice recognition function (Siri Eyes Free Mode) on this product.
  • Page 26 Menu Item Description [Auto Answer] Select [On] to answer an incoming call automatically. [On] [Off] [Ring Tone] Select [Off] to use the ring tone of the paired device, or [On] [Off] select [On] to use the ring tone of this unit. [Invert Name] Select [Yes] to change the order of the first and last names in the phone book.
  • Page 27 • When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product. ▶Making and receiving calls • You may hear a noise in the following situations: – When you answer the phone using the button on the phone. –...
  • Page 28 Touch then swipe left on the screen. Touch then The system setting screen appears. Touch [AV Source Settings]. Confirm that [Bluetooth Audio] is turned on. Touch then swipe left on the screen. The source/application screen appears. Touch [Bluetooth Audio]. The Bluetooth audio playback screen appears. Basic operation Bluetooth audio playback screen Track number indicator...
  • Page 29 Selects a file or folder from the list to playback. NOTE This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher. Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth (page 21). - 29 -...
  • Page 30: Wi-Fi

    Wi-Fi® By connecting this unit to a Wi-Fi network, you can browse the Internet and use Apple CarPlay or Android Auto via the wireless connection. Wi-Fi connection Turn on the Wi-Fi function on the device. Touch then swipe left on the screen. Touch then Touch [Wi-Fi Settings: Hotspot].
  • Page 31 Access point setting screen Available network SSIDs Touch to connect selected network. Automatic connection status Touch to switch between the network automatically or manually. Network connection priority Drag the network upwards to prioritise the connection by touching Searches for existing networks. Touch to go to Adding access point screen (page 31).
  • Page 32 Connects Wi-Fi network. Touch to select desired network then enter the password if required. If you want to connect to a network that is not listed on the screen, touch [Other (Add network)] and enter the required information. Searches again for existing networks. WPS Wi-Fi connection You can connect easily to a Wi-Fi network, if WPS (Wi-Fi Protected Setup™) is available on the connected device.
  • Page 33 NOTE This setting is available only when you stop your vehicle in a safe place and apply the handbrake. The menu items vary according to the source/application. Menu Item Description [Wi-Fi] Switch Wi-Fi connection on or off. [On] [Off] [Hotspot setting] Set up the Wi-Fi access point (page 30).
  • Page 34 The Wi-Fi audio playback screen appears. NOTES • [Wi-Fi Audio] is displayed as [Android Auto] when the Android Auto is in use. • [Wi-Fi Audio] is displayed as [Apple CarPlay] when the Apple CarPlay is in use. Basic operation Wi-Fi audio screen (Example: Apple CarPlay) Wi-Fi audio with Apple CarPlay operation is same as the iPod®...
  • Page 35: Browser

    • When you use the browser, do not install software or programmes that Pioneer is not involved with. If you install such software or programmes, mechanical trouble may occur with this unit, or your entered information and the personal information registered in this unit may be put at risk.
  • Page 36 Web browser screen Available website thumbnails Touch to go to the selected website. Swipe left/right to switch between registered webpage list. Website screen Browser toolbar To display the toolbar, swipe down from the top of the screen. Returns to the web browser screen. Displays the previous page.
  • Page 37 NOTE When using the browser while Apple CarPlay, Android Auto or an external navigation system is in operation, the browser is displayed on the connected rear monitor only when the browser is displayed on the main monitor. Otherwise, a black screen is displayed on the connected rear monitor. - 37 -...
  • Page 38: Caravassist

    CarAVAssist CarAVAssist is an application that allows you to configure and transfer various settings of this unit and register URLs as favourites so that you can browse them using this unit's web browser. You can also update this unit's firmware wirelessly by using this application.
  • Page 39 • Registering your favourite webpage URLs to your bookmarks to see those webpages on the web browser • Registering your favourite teams to receive information about them on the sports application of the unit • Organising notifications on your smartphone (Android) for displaying on the unit •...
  • Page 40 Touch [System Information]. Touch [Firmware Update]. Touch [CarAVAssist]. Follow the on-screen instructions to finish updating the firmware. NOTES • This product will reset automatically after the firmware update is completed if the update is successful. • If an error message appears on the screen, touch the display and perform the above steps again. - 40 -...
  • Page 41: Source/Application

    Source/application Supported source and application You can play or use the following sources or application with this product. • Digital Radio (page 44) • Radio (page 48) • USB (page 52) The following sources or applications can be played back or used by connecting an auxiliary device.
  • Page 42 Source list Touch to see the selected source. Selecting [Power OFF] will turn off most of the functions on this unit. The [Power OFF] mode is released in the following cases: • Footage from the rear view camera is input when the vehicle is in reverse. •...
  • Page 43 Displays the source/application list. Settings (page 85) and Favourite menu (page 104) Selects or customises the equaliser curve (page 99). Hands-free phoning (page 22) Selecting a source/an application NOTE [Source OFF] is only available for AV sources. Source/application selection screen Touch then swipe left on the screen.
  • Page 44: Digital Radio

    Digital Radio tuner operations For improved Digital Radio reception, make sure a Digital Radio aerial with phantom power input (active type) is used. Pioneer recommends using AN-DAB1 (sold separately) or CA-AN-DAB.001 (sold separately). Current consumption of Digital Radio aerial should be 100 mA or less.
  • Page 45 Basic operation Digital Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast station to a key. Displays the preset channel list. Select an item on the list to switch to the preset channel. Selects the DAB1, DAB2, or DAB3 band.
  • Page 46 Selects a station. Touch the following category then select each item. [Station]: Displays all service components. [Program Type] (PTY label): Searches from programme type information. [Station Group]: Displays the ensemble list. If you touch [List Update], you can update station list information manually. NOTES •...
  • Page 47 Menu Item Description [TA OFF] Disables this function. [Soft Link]*1 When HARD LINK is unsuccessful, tunes to [On] [Off] another station group that supports the similar station. If no station can be found or reception remains poor, this function will automatically switch to a similar FM broadcast.
  • Page 48: Radio

    Radio Starting procedure Touch then swipe left on the screen. Touch [Radio]. The radio screen appears. Basic operation Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel.
  • Page 49 Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform non stop seek tuning. Storing the strongest broadcast frequencies (BSM) The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset channel keys [1] to [6].
  • Page 50 Area radio stations list screen Available radio stations Touch to tune in to the selected radio station. Radio settings Touch then swipe left on the screen. Touch then The system setting screen appears. Touch [AV Source Settings]. Touch [Radio settings]. The menu items vary according to the source.
  • Page 51 Menu Item Description [Regional]*2 Switches whether the area code is checked [On] [Off] during the Auto PI search. [Alternative FREQ]*2 Allow the unit to retune to a different frequency [On] [Off] providing the same station. [Auto PI]*1 Searches for the same PI (Programme [On] [Off] Identification) code broadcast station from all frequency bands automatically when the...
  • Page 52: Usb

    Plugging/unplugging a USB storage device You can play audio, video, or still image files stored in a USB storage device. Plugging a USB storage device Plug a USB Type-C® storage device into the USB Type-C cable. When you use a USB Type-A storage device, use a USB Type-C to USB Type-A adaptor (supplied) for plugging.
  • Page 53 Starting procedure Touch then swipe left on the screen. Plug the USB Type-C storage device into the USB Type-C cable (page 52). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Basic operation You can set the screen size for the video and image files (page 105).
  • Page 54 Sets a repeat play range for all files/the current folder/the current file. Switches between random and normal file playback order. Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left.
  • Page 55 Constructs the database for using the Music Browse mode (page 55). Switches the current music information display. ▶Selecting a file using Music Browse mode You can select files to play back using the category list if the files contain tag information.
  • Page 56 Video source screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Performs fast reverse or fast forwards. Touch again to change the playback speed. Stops playback. Touch again to start from the beginning next time. Performs frame-by-frame playback.
  • Page 57 Skips files forwards or backwards. Still image source Image files are not displayed in the rear display. Still image screen Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Skips files forwards or backwards.
  • Page 58 Sets a repeat play range for all files/the current folder. Plays all files in the current repeat play range or does not play them in random order. Switches the following media file types. [Music]: Audio files [Video]: Video files [Photo]: Image files Selects a file from the list.
  • Page 59: Iphone

    iPhone® NOTE iPhone may be referred to as iPod in this manual. Connecting your iPhone When connecting an iPhone to this product, the settings are automatically configured according to the device to be connected. For details of the compatibility, refer to Compatible iPhone models (page 117).
  • Page 60 Displays the link search screen. Select a song from the list related to the song currently playing. If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music® Radio. Switches between playback and pause.
  • Page 61 iPhone application screen Switches between playback and pause. Skips files forwards or backwards. Apple Music Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: https://www.apple.com/music/ Apple Music Radio screen Switches between playback and pause.
  • Page 62 Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. •...
  • Page 63: Apple Carplay

    • Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 64 Touch then The communication setting screen appears. Touch [Driving Position]. Select the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Wired connection Connect an Apple CarPlay compatible device to this unit via USB. Touch the Apple CarPlay icon.
  • Page 65 If the device that you want to connect does not appear, touch on the screen again. You can also start Apple CarPlay with the desired device by opening the Bluetooth or Apple CarPlay setting menu while displaying the device search or device list screen. You can use Siri function by touching button once Apple CarPlay is activated.
  • Page 66: Android Auto

    • Android Auto allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 67 Touch then swipe left on the screen. Touch then The communication setting screen appears. Touch [Driving Position]. Select the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Wired connection Connect an Android Auto™ compatible device to this unit via USB. Touch the Android Auto icon.
  • Page 68 You can use voice recognition function by touching button once Android Auto is activated. NOTES • For details on USB connection, refer to the Installation Manual. • When the device for Android Auto is connected to this unit, the device is also connected via Bluetooth at the same time.
  • Page 69 Touch then swipe left on the screen. Touch then Touch [Android Auto Auto-launch] to switch [On] or [Off]. - 69 -...
  • Page 70: Sports

    Sports Check team information such as the game scores and game information of your favourite teams registered on CarAVAssist. Using sports The unit displays three days of sports information, for the previous, current, and next day. Important • To use the sports function, you need to connect this unit to the Internet via a Wi-Fi network. •...
  • Page 71: Weather

    Weather Display the current temperature and daily or hourly forecast in your current location. The weather function uses a location service to determine your current location. Using weather Important • To use the weather function, you need to connect this unit to the Internet via a Wi-Fi network. •...
  • Page 72 NOTE If a data item is unknown or missing, “-” is displayed. - 72 -...
  • Page 73: Amazon Alexa

    Amazon Alexa You can talk to Amazon Alexa on the unit. With Alexa Built-in, you can ask to play music, place calls, listen to audiobooks, hear the news, check the weather, control smart home devices and more-all while you keep your hands on the wheel and eyes on the road. For details, visit the Amazon website for your region.
  • Page 74 Touch then Touch [Amazon Alexa setting]. Touch [Setup]. The introduction screen appears. Touch [Get started]. Use your mobile device to go to the displayed URL or scan the QR code. Enter your Amazon account Email address and password. Enter the code that is shown in step 6. A completion message is displayed when the unit is authorised.
  • Page 75 Voice operation Talk to Amazon Alexa to perform the desired operation by using “Alexa” as the wake word. NOTE Wake words other than “Alexa”, such as “Echo”, “Amazon”, or “Computer”, are not supported. Entertainment You can play content through Amazon Music, Kindle books text-to-speech, or Audible by talking to Amazon Alexa.
  • Page 76 Switches between playback and pause. Skips songs forwards or backwards. Switches the repeat function ON/OFF. Switches between random and normal song playback order. Alexa screen 2 (Example: Amazon Music) Gives a Like to the currently playing song. Gives a Dislike to the currently playing song. Phone call control Alexa allows you to use voice commands to place or answer calls using a mobile device paired to this unit.
  • Page 77 NOTE Support for the Alexa Calling service will be available soon. Before using phone call control Before using this function, connect your mobile device to this unit via Bluetooth. Touch then swipe left on the screen. Touch then Touch [Amazon Alexa setting] then [Main Menu]. Touch [Settings] then [Contact list].
  • Page 78 Starting procedure ▶Touch operation Touch then swipe left on the screen. Touch [Alexa]. Talk to Amazon Alexa to perform the desired hands-free phone operation. ▶Voice operation Talk to Amazon Alexa to perform the desired hands-free phone operation by using “Alexa” as the wake word. For example, say “Alexa, call home”...
  • Page 79 [Settings] [Contact list] Displays the list of mobile devices that are connected to Amazon Alexa (page 77). NOTE The device search list screen is displayed when no mobile device is paired via Bluetooth. [Hands-free listening] Switches whether or not to use the wake word (“Alexa”). [Notifications] Switches whether or not notifications of received messages are displayed.
  • Page 80: Hdmi

    HDMI CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. NOTE A micro HDMI® cable (sold separately) is required for connection. For details, refer to the Installation Manual.
  • Page 81: Aux

    You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the handbrake. NOTE A Mini-jack AV cable (sold separately) is required for connection.
  • Page 82 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. You can set the screen size for the video image (page 105). Switches between the video input and audio input. - 82 -...
  • Page 83: External Component

    External component Camera view You can display the video image output using the device connected to the back camera input or 2nd camera input. For details, refer to the Installation Manual. Starting procedure Touch then swipe left on the screen. Touch [Camera View].
  • Page 84 Touch [Navi]. - 84 -...
  • Page 85: Settings

    Settings You can adjust various settings in the main menu. Displaying the setting screen Touch then swipe left on the screen. Touch Touch one of the following categories, then select the options. System settings (page 85) Theme settings (page 95) Audio settings (page 96) Video settings (page 100) Communication settings (page 102)
  • Page 86 Touch this key to switch the display between the rear view image and 2nd camera image. CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the gearstick is moved to REVERSE (R) from another position.
  • Page 87 Menu Item Description [Back Camera Input] Setting rear view camera activation. [Off] [On] [Camera Polarity] Setting the polarity of the rear view camera. [Battery] The polarity of the connected lead is positive. [Ground] The polarity of the connected lead is negative. NOTE This function is available when [Back Camera Input] is set to [On].
  • Page 88 Menu Item Description [Parking Assist Guide Adjusting the guidelines by dragging or touching Adjust] on the screen. Touch [Default] to reset the settings. CAUTION • When adjusting the guidelines, be sure to park the vehicle in a safe place and apply the handbrake. •...
  • Page 89 [Demo Mode] Menu Item Description [Demo Mode] Setting the demo mode. [On] [Off] [System Language] Menu Item Description [System Language] Select the system language. NOTES • If the embedded language and the selected language setting are not the same, the text information may not display properly. •...
  • Page 90 [Clock Settings] Menu Item Description [Clock Settings] Setting or adjusting the following time and clock display. • Date display format: day-month-year, month-day-year, or year-month-day • Time display format: [12hour] or [24hour] • UTC (Universal Time Coordinated) time zone difference: [UTC-12h] to [UTC+14h] •...
  • Page 91 Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching You can use this function when [Dimmer Trigger] is set to [Time]. TIPS • Each touch of moves the cursor backwards or forwards in the 15 minute width.
  • Page 92 * With some pictures, you cannot adjust [Hue] and [Colour]. NOTES • The adjustments of [Brightness], [Contrast], and [Dimmer] are stored separately when your vehicle's headlights are off (daytime) and on (nighttime). • [Brightness] and [Contrast] are switched automatically depending on the setting of [Dimmer Settings].
  • Page 93 Menu Item Description [Firmware Update] Update to the latest version of the firmware by using a USB storage device or wireless connection. To update the firmware via wireless connection, CarAVAssist is required. For details on performing the wireless update, refer to Updating the firmware wirelessly (page 39).
  • Page 94 Menu Item Description [3D Calibration Status] Check the sensor learning status, such as the degree of learning. You can also check the current sensor values and the total number of speed pulses. To delete the learned results stored in the sensor, follow the below instructions.
  • Page 95: Theme Settings

    [Amazon Alexa setting] Setting the Amazon Alexa (page 78). [Terms of Use / Privacy] Menu Item Description [Terms of Use / Privacy] Select to accept or withdraw from the Internet Communication Service the Terms of Use and Privacy Policy. NOTES •...
  • Page 96: Audio Settings

    Menu Item Description (custom)*1 Displays the background display image imported from the USB storage device. (off ) Hides the background display. [Illumination]*2 Select an illumination colour from the colour list or create a defined colour. Coloured Keys Select the desired preset colour. (custom) Displays the screen to customise the illumination colour.
  • Page 97 Menu Item Description [Fader/Balance] Touch to adjust the front/rear speaker balance. Set [Front] and [Rear] to [0] when using a dual speaker system. Touch to adjust the left/right speaker balance. You can also set the value by dragging the point on the displayed table.
  • Page 98 Menu Item Description [Speaker Level] Adjust the speaker output level of the listening position. Listening Position*1*2 Touch to select the listening position then [Off] [Front Left] [Front select the output speaker. Right] [Front] [All] Touch to adjust the selected speaker output level.
  • Page 99 Menu Item Description [Graphic EQ] Select or customise the equaliser curve. [Super Bass (S.Bass)] Select a curve that you want to use as the basis of [Powerful] [Natural] customising then touch the frequency that you want to [Vocal] [Flat] [Dynamic] adjust.
  • Page 100: Video Settings

    Menu Item Description [Load Settings] Load the sound settings. [Initial Settings] [Sound NOTE Setting] [Sound Setting] is available only when you have already saved the sound settings (page 99). *1 [All] is not available when [Network Mode] is selected as the speaker mode. *2 If you change the listening position setting, the set values for all speakers will change in conjunction with this setting.
  • Page 101 [Time Per Photo Slide] Menu Item Description [Time Per Photo Slide] Select the interval of image file slideshows on this product. [5sec] [10sec] [15sec] [Manual] [Video Signal Setting] Menu Item Description [AUX] Select the suitable video signal setting when you connect [Auto] [PAL] [NTSC] [PAL- this product to an AUX equipment.
  • Page 102: Communication Settings

    Communication settings [Connection] Menu Item Description [Connection] Displaying a list of mobile devices that have been connected via Bluetooth or USB. Connect, disconnect, or delete registered mobile device manually. Touch to delete registered device. To connect a registered device manually, perform the following: •...
  • Page 103 [Driving Position] Menu Item Description [Driving Position] Setting the driving position. [Right] [Left] • Apple CarPlay™ (page 63) • Android Auto™ (page 66) [Android Auto Auto-launch] Menu Item Description [Android Auto Auto- Select [On] to display the Android Auto screen launch] automatically when an Android device is connected to the [On] [Off]...
  • Page 104: Favourite Menu

    Favourite menu Registering your favourite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favourites] screen. NOTE Up to 12 menu items can be registered in the favourite menu. Creating a shortcut Touch then swipe left on the screen.
  • Page 105: Other Functions

    Other functions Setting the clock display You can set the time format, time zone, daylight saving, and the date format. However, the time and date are automatically adjusted by the GPS aerial and cannot be adjusted by the user. Touch the current time on the screen. Set the following items in the settings.
  • Page 106 Touch the desired mode. [Full] Displays images across the entire screen. NOTE Some images may not be displayed across the entire screen. [Zoom] Displays the images enlarging them vertically. [Normal] Displays images without changing the ratio. [Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is.
  • Page 107: Appendix

    – Correct the settings. solution to your problem cannot be found here, contact your dealer or the nearest The audio or video skips. authorised Pioneer service facility. → This product is not firmly secured. – Secure this product firmly. Common problems No sounds are produced.
  • Page 108 – Update the iPhone software version. Problems with Application → An error has occurred. screen – Reconnect the iPhone with the USB interface cable for iPhone. – Park your vehicle in a safe place, and A black screen is displayed. →...
  • Page 109 If the error persists, – Change to a different source. Then, record the error message and contact your return to the USB storage device. dealer or your nearest Pioneer service Unplayable File centre. → There is no playable file in the USB storage device.
  • Page 110 – Disconnect the cable from the iPhone. HUB Error Once the iPhone’s main menu is → The connected USB hub is not displayed, reconnect the iPhone and supported by this product. reset it. – Directly connect the USB storage → The iPhone firmware version is old. device to this product.
  • Page 111 Android Auto contact your dealer or an authorised compatible device. Pioneer Service Station. – Park your vehicle in a safe place, and follow the instructions displayed on Android Auto the screen. If the error message is still...
  • Page 112 USB storage device compatibility • For more details about DivX, visit the following site: https://www.divx.com/ • For details about USB storage device compatibility with this product, refer to Specifications (page 120). Media compatibility chart • Protocol: bulk • You cannot connect a USB storage device General to this product via a USB hub.
  • Page 113 WAV compatibility the file was created or on the contents of the file. • The sampling frequency shown in the • This product is not compatible with display may be rounded. packet write data transfer. SAMPLING FREQUENCY 16 kHz to 192 •...
  • Page 114 Maximum frame rate 30 fps registered trademarks owned by Bluetooth SIG, .mkv Inc. and any use of such marks by PIONEER CORPORATION is under license. Other Compatible video codec MPEG4, H.264, trademarks and trade names are those of their VC-1 respective owners.
  • Page 115 Copyright © 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 116 This unit plays back AAC files encoded by iPhone devices iTunes. • Pioneer accepts no responsibility for data High-Resolution Audio lost from an iPhone, even if that data is lost while using this product. Please back up your iPhone data regularly.
  • Page 117 where it may become jammed under the Apple Music brake or accelerator. • For details, refer to the iPhone manuals. Apple Music is a trademark of Apple Inc., registered in the U.S. and other iPhone and Lightning® countries. Apple CarPlay Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified...
  • Page 118 Content application(s) or Using app-based service by its provider. connected content • Pioneer is not liable for any issues that may arise from incorrect or flawed app- based content. Important • The content and functionality of the...
  • Page 119 • Apple CarPlay and Android Auto allow • Never touch the LCD screen with access to applications other than those anything besides your finger when listed (subject to limitations while operating the touch panel functions. The driving), but the extent to which content LCD screen can scratch easily.
  • Page 120 Load impedance: visible. In that case, please consult your 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable) dealer or the nearest authorised Pioneer Preout output level (max): 4.0 V Service Station. Equaliser (13-Band Graphic Equaliser):...
  • Page 121 kHz/4 kHz/5 kHz/6.3 kHz/8 kHz/10 kHz/ <USB audio> 12.5 kHz MP3 decoding format: Slope: MPEG-1 & 2 & 2.5 Audio Layer 3 -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 WMA decoding format: dB/oct Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch audio) Phase (High): Normal/Reverse (Windows Media Player) HPF (Mid): ON/OFF...
  • Page 122 MPEG2 video decoding format: LW tuner Main Profile Frequency range: 153 kHz to 281 kHz Bluetooth Usable sensitivity: Version: 28 μV (S/N: 20 dB) Bluetooth 4.2 certified Signal-to-noise ratio: Output power: 60 dB (IEC-A network) +4 dBm Max. (Power class 2) BLE (Bluetooth Low Energy) output power: DAB tuner +3.5 dBm Max.
  • Page 123 Aerial: Micro strip flat aerial/right-handed helical polarization Aerial cable: 3.55 m Dimensions (W × H × D): 33 mm × 14.7 mm × 36 mm Weight: 73.7 g NOTE Specifications and design are subject to possible modifications without notice due to improvements.
  • Page 124 © 2020 PIONEER CORPORATION <OPM_SPHEVO93DABEW5_EG_C> EW5...

This manual is also suitable for:

Sph-evo93dabSph-evo93dab-duc

Table of Contents