Denver WCT-8010 Quick Start Manual

Overview
2 inch color LCD Display
Shot button
OK button
Power Switch
USB connector
Micro SD card slot
Replay button
The camera has 3 basic operation modes:
1. OFF mode: Power switch is at OFF position.
2.
ON mode: Power switch is at ON position.
3. TEST mode: Power switch is at TEST position.
In the above three modes, the OFF mode is the specified safe mode when replacing the microSD or batteries and transporting the camera.
A. There are 3 modes under system setting for your selection.
a. Camera
It only takes photos at a time.
b. it only takes videos at a time.
c. Camera &Video.
It takes photo firstly, then takes videos.
B. There are also 2 ways to take photos or videos.
a. Manually to press the SHOT button
After sliding power switch to 'TEST', without any menu on the screen, press Shot to take photos or videos.
b. Automatically
After sliding power switch to ON, the LED blinks 15s, then the camera takes photos or videos when the movement is detected.
C.
To view the photos or videos on the camera, please turn off the camera, slide power switch to Test, press OK button to enter
view model.
a. Photos viewing
Press up or down button to view the previous of next photo.
b. Videos viewing
Press Replay button to start the video, press Replay button again to stop.
Note: Press OK to return to screen.
D. Please note, that this is not an error with the Camera:
Heavy rain, fog and drizzle (in the dark) will give white photos without motive.
DENVER WCT-8010
Wild kamera
Quick Start Guide
8)Menu button
9)Left button
10)Up button
11)Down button
12)Right button
13)Microphone
ENG-1