Table of Contents
Advertisement
8
www.raider.bg
1. General instructions for safe operation.
Read all instructions! Failure to follow all instructions can lead to unintended consequences. Keep
these instructions in a safe place.
1.1. Safety workplace.
1.1.1. Keep the space around the heater always clean.
1.1.2. The heater is not designed for heating in wet premises. Whatever falls of water or falling
of the appliance in water is very dangerous and is a prerequisite for electric shock and / or serious
damage!
Do not use the heater in the immediate surroundings of baths, showers, or swimming pool!
1.1.3. Never place the heater on carpets with long fibres!
1.1.4. Make sure the heater is positioned on a stable, horizontal surface.
1.1.5. Do not place the heater near furniture!
1.1.6. Do not use the heater near open windows and flammable objects such as curtains,
tablecloths, clothes and similar.
1.1.7. Do not switch the heater within the environments with increased risk of explosion in the
vicinity of flammable liquids, gases, dust, etc...
1.1.8. Be vigilant when you turn on the heater in rooms where present children or disabled persons!
1.1.9. Be vigilant when you turn on the heater in rooms with pets!
1.1.10. Never leave alone your pet in a room with switched on heater!
1.11.
Warning! To prevent overheating, do not cover the heater!
1.12.
Warning! The heater must not be placed directly under, or towards a wall socket!
1.13. Do not use the heater outside.
1.14. Store the heater in places out of reach for children.
1.15. Do not attempt to insert your fingers or any objects in the front or the rear fan grille when the
item is plugged in.
1.2. Safety requirements for working with electricity.
1.2.1. The plug of the heater should not be damaged. Never modify the plug. Do not use any other
additional electrical appliances. Do not use plug adapters.
Using the original plugs and sockets reduces the risk of electric shock.
1.2.2. Place the cord away from the heating of the heater as to avoid overheating of the cable.
1.2.3. Do not use the cable cord for purposes for which it is not intended, for example to move or
re-position the heater by pulling the cable cord or to try to unplug the heater from the wall socket by
the cable cord. Keep the cable cord away from heat and sharp edges or objects.
1.2.4.
Damaged or entangled cords increase the risk of electric shock!
1.2.5. Before plugging the socket make sure the switch (2) is in the "0" "off".
1.2.6. Always unplug the heater from the wall socket before moving it.
1.2.7. Before cleaning, always unplug the heater.
1.2.8. Do not switch the heater if you have dropped it, or if its body is damaged.
1.2.9. Do not unplug the heater by pulling the wire out of the wall socket.
The appliance should cool down through the ventilation effect.
1.2.10. Do not use this heater with a programmer, timer or any device that switches the heater on
automatically, since a fire risk exists if the heater is positioned incorrectly.
2. Functional description and purpose of the heater.
The heater is an electrical appliance with insulation class II. Basically, it consists of a heater and
a fan powered by a single phase electric motor. This item is intended for indoor use with normal
Advertisement
Table of Contents
