Table of Contents
Advertisement
S
M
ET
ODE
S
M
I
95: VFO MODE
ET
ODE
TEM
Function: Selects or disables the VFO band edge limiting for the current band.
Available Values: ALL / BAND
Default: BAND
ALL:
When the VFO frequency reaches the high edge of the current band, the VFO
frequency will jump to the low band edge of the next band (or vice versa).
BAND: When the VFO frequency reaches the high band edge of the current band, the
VFO frequency will jump to the low band edge of the current band (or vice versa).
S
M
I
96: VFO SKIP
ET
ODE
TEM
Function: Set the My Band.
Available Values: ON / OFF
Default: OFF
The "My Band" feature allows you to select several operating bands, and make only those
bands available for selection via the B key.
ON: Only the bands that are turned on will be shown when pushing the B key.
OFF: When the B key is pressed, the bands that are turned "OFF" will not be shown.
See page 119 for details.
S
M
I
97: VIBRATOR
ET
ODE
TEM
Function: Enables/Disables the Vibrator function.
Available Values: OFF / BUSY / SIGNALING
Default: OFF
OFF:
The Vibrator function is disabled.
BUSY:
The transceiver vibrates when receiving any signal.
SIGNALING: The transceiver vibrates when a signal which includes a CTCSS, DCS, or
EPCS code which matches the decoder, is received.
S
M
I
98: VIBRATOR MODE
ET
ODE
TEM
Function: Selects the vibration mode of the Vibrator function.
Available Values: MODE1 / MODE2 / MODE3
Default: MODE1
MODE1: The transceiver vibrates continuously.
MODE2: The transceiver vibrates for a long interval.
MODE3: The transceiver vibrates for a short interval.
146
S
M
S
ET
ODE
ELECTION
D
ETAILS
VX-8GR/GE O
PERATING
M
ANUAL
Advertisement
Table of Contents
