Yaesu VX-8GR/GE Operating Manual page 145

S M I 81: SET MODE FORMAT
ET ODE TEM
Function: Selects the display format of the Set Mode operation.
Available Values: LIST / ITEM
Default: LIST
S M I 82: SMART SEARCH
ET ODE TEM
Function: Selects the Smart Search Sweep mode.
Available Values: SINGLE / CONTINUOUS
Default: SINGLE
SINGLE: The transceiver sweeps the current band once in each direction starting
on the current frequency. All channels where activity is present (up to
15 in each direction) are loaded into the Smart Search memories. Whether
or not all 31 memories are filled, the search stops after one sweep in
each direction.
CONTINUOUS: The transceiver makes a sweep in each direction as with the "SINGLE"
mode, but if all 31 channels are not filled after the first sweep, the radio
continues sweeping until they are all filled.
S M I 83: S-METER SYMBOL
ET ODE TEM
Function: Selects the S- & TX PO meter Symbol.
Available Values: Four patterns (
Default:
S M I 84: SPEC-ANALYZER
ET ODE TEM
Function: Selects the Spectrum Analyzer sweep mode.
Available Values: 1Time / CONTINUOUS / Full Time
Default: 1Time
1Time: The receiver sweeps the current band once.
CONTINUOUS: The receiver sweeps the current band repeatedly until the Spectrum Ana-
lyzer is turned off.
Full Time: This mode is activated similar to a "Continuous" mode. However, the
transceiver outputs audio on the center frequency ( ) through the speaker
when Spectrum Analyzer is activated.
S M I 85: SQL LEVEL
ET ODE TEM
Function: Sets the Squelch threshold level.
Available Values: LEVEL 0 ~ LEVEL 15
Default: LEVEL 1
VX-8GR/GE O
PERATING
S M S
ET ODE ELECTION
M
ANUAL
D
ETAILS
, ,
S M
ET ODE
, or )
143