Salus ST621TX Instruction Manual page 5

Powering up the ST621TX for the first time
As soon as the batteries have been inserted, the ST621TX will power up for the first
time and behave in the following way:
All the segments on the display along with the display backlight will be turned
on as shown.
After two seconds, the software version number will be briefly on the screen.
The ST621TX will now prompt you to choose a language. If you require ENGLISH
press OK. If you require a different Language use the touch ring to scroll through
the language options then press OK.
The ST621TX at this point will be in AUTO and at factory default settings.
Changing default settings will be explained on page 15. You will also notice that
the time at the top of the LCD is flashing. This will continue to flash until the unit
picks up the RCC (Radio Controlled Clock) signal and displays the correct time.
More information on the RCC can be found on page 24.
Now put the ST621TX front fascia in a safe place so you can mount the ST620
back plate. The back plate is easily fixed to the wall and uses industry standard
mounting positions. We recommend that you continue with the back plate
mounting before starting to program the ST621TX.
ST621TX INSTRUCTION MANUAL 5