Table of Contents
Advertisement
INTRODUCTION
Thank you for your purchase of the Selectronic Sine wave inverter, model WM1000-24V.
Your WM1000 is a state-of-the-art high performance TRUE SINE WAVE DC-AC Inverter.
Many hours of development time have been invested in the WM1000 so that we can provide you with a
reliable high quality inverter. The output from your WM1000 is as good as, if not better than mains
power. If looked after properly, the WM1000 will give you many years of reliable service.
WARRANTY CARD
Before proceeding any further, it is extremely important that you complete your warranty card
NOW. This will enable us to immediately register your 5 year warranty period. By accurately
completing your warranty card, you will provide us with valuable information that will assist us in
keeping up with your alternative energy needs. Please take a few moments to fill in the warranty
card. Your efforts will be greatly appreciated.
INSTALLATION
The installation of your inverter is extremely important. Failure to follow the recommended installation
instructions may void your warranty. If in doubt, ask your supplier.
After unpacking, check for any damage that may have occurred during transit. If there are any signs of
damage, contact your supplier immediately.
The Inverter must be installed in a dry, cool, dust-free environment.
Please leave at least 300mm clearance around the sides and top of the Inverter and approximately
200mm at the base as this will aid the natural cooling of the Inverter. The air vents on the underside of
the WM1000 also need to be kept clear of obstructions.
2
Advertisement
Table of Contents
