Introduction - Sno-Way ProControl 2 Plus Installation Manual

This manual was written for the installation of your
upgraded plow control and lighting system. Refer to the
Table of Contents for an outline of this manual.
Please keep this manual with your machine at all times as
reference material and so it can be passed on to the next
owner if the machine is sold.
We require that you read and understand the contents of
this manual COMPLETELY, especially the chapter on
SAFETY, before attempting any procedure contained in
this manual.
The Society of Automotive Engineers has adopted
this SAFETY ALERT SYMBOL to pinpoint character-
istics that, if NOT carefully followed, can create a
safety hazard. When you see this symbol in this man-
ual or on the machine itself, BE ALERT!, your per-
sonal safety and the safety of others, is involved.
• Defined in the next column, are the SAFETY ALERT
messages and how they will appear in this manual.
INDICATES A HAZARDOUS SITUATION WHICH,
IF NOT AVOIDED, COULD RESULT IN DEATH
OR SERIOUS INJURY.
INDICATES A HAZARDOUS SITUATION WHICH,
IF NOT AVOIDED, COULD RESULT IN MINOR
OR MODERATE INJURY.
IS USED TO ADDRESS PRACTICES NOT
RELATED TO PHYSICAL INJURY. FAILURE TO
FOLLOW COULD
DAMAGE.
NOTE: Additional information concerning the equipment
or the procedure that may or may not be contained else-
where in this manual.

INTRODUCTION

WARNING
CAUTION
NOTICE
LEAD TO PROPERTY
We reserve the right to make changes or improve the
design or construction of any part(s) without incurring the
obligation to install such parts or make any changes on
any unit previously delivered.
Graphics and illustrations may be used which may show
equipment and/or options not included in every
installation without incurring the obligation to install such
parts or make changes on units previously delivered.
Sno-Way Service Parts Manuals are available on-line or
at your authorized Sno-Way dealer. Factory contact
information is available at www.snoway.com.
2