Hints And Tips / Solving Problems - Belling BFS54SCCG Instruction Manual

HINTS AND TIPS
Solving Problems
If you have a problem with your appliance, check the table below before calling service. You
may be able to avoid a service call by and avoid unnecessary inconvenience and expense.
Problem
No spark obtained when
gas burner knob is
pushed / turned
Burner will not light even
though spark can be
seen/heard
Oven or grill not working
Oven light not working
Oven not hot enough
Possible causes
Power not turned on
Household fuse blown
Circuit breaker tripped
Spark plug is wet or dirty
Gas supply valve is turned off
Burner crown & cap not positioned correctly
Port blockage in ignition area
Digital Clock not set properly
Power not turned on
Household fuse blown
Controls incorrectly set
Circuit breaker tripped
Power not turned on
Household fuse blown
Circuit breaker tripped
Lamp blown or loose in socket
Heat escaping through incorrectly sealed
door
Door seal is worn or has moved
What to do
Switch on electricity
Check fuses
Check circuit breaker
Dry or clean spark plug
Turn on gas supply
Remove parts and refit carefully
Make sure that ports and ignition
area are clean and dry
Refer to digital timer instructions
Switch on electricity
Check fuses
Reset controls
Check circuit breaker
Switch on electricity
Check fuses
Check circuit breaker
Replace or tighten globe
Check shelves or dishes are not
preventing door closing properly,
Check that door is fitted properly
after door removal for cleaning
Replace seal or refit it
20