Clock Functions - Electrolux COE7P31X User Manual

12 www.electrolux.com
6.4 Checking the temperature
You can check the current temperature
in the oven when the function or
programme works.
1. Press
The display shows the temperature in the
oven.
2. Press
the set temperature automatically
after 5 seconds.
6.5 Fast Heat Up
Do not put food in the oven when the
Fast heat up works.

7. CLOCK FUNCTIONS

7.1 Clock functions table
Clock function
00:00
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Press
2. Press
3. Press
.
or the display shows again
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
COUNT UP TIMER To set the count up, which shows how long the oven
and 12:00.
or to set the hours.
.
or to set the minutes.
The Fast Heat Up is available only for
some heating functions. If Faulty Tone is
turned on in the settings menu, the signal
sounds if the Fast Heat Up is not
available for the set function. Refer to
"Additional functions" chapter, Using the
settings menu.
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and
hold
If the Fast Heat Up is turned on the
display shows flashing bars.
Application
To show or change the time of day. You can change
the time of day only when the oven is on.
To set how long the oven works.
To set when the oven turns off.
To combine DURATION and END function.
To set a countdown time. This function has no effect
on the operation of the oven. You can set the MI‐
NUTE MINDER at any time and also when the oven
is off.
works. This function has no effect on the operation of
the oven. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not turned on if DU‐
RATION and END are set.
4. Press
The display shows the new time.
To change the time of day press
again and again until
7.3 Setting the DURATION
1. Set a heating function and
temperature.
for more than 3 seconds.
.
starts to flash.