Table of Contents
Advertisement
Programming
Panasonic DECT repeater noted on page 4.
Contact your Panasonic dealer for details.
Important:
R Before registering the repeater to this base unit,
you must turn the repeater mode on.
R Do not use more than one repeater at a time.
Setting the repeater mode
Handset / Base unit
1
M
N#138
2
MbN: Select the desired setting. a MOKN
3
Proceed with the operation for your unit.
Handset: M
N
Base unit: M
N
Registering the DECT repeater (KX-A405/
KX-A406) to the base unit
Note:
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the DECT
repeater.
1
Base unit:
Press and hold M
2
DECT repeater:
Connect the AC adaptor, then wait until the
indicator and
indicator light green.
3
Base unit:
To exit the registration mode, press M
38
KX-TGF310_320BX_UE_0706_ver002.pdf 38
N for about 5 seconds.
N.
7/29/2015 11:36:01 AM
Advertisement
Table of Contents
