Hilti SD 4500-A18 Original Operating Instructions
Hide thumbs
Also See for SD 4500-A18:
- Operating instructions manual (18 pages) ,
- Original operating instructions (48 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Hilti SD 4500-A18
Summary of Contents for Hilti SD 4500-A18
- Page 1 SD 4500-A18 English Français Español Português...
- Page 5 SD 4500-A18 Original operating instructions ........
- Page 6 • Make a note of the designation and serial number printed on the identification plate in the following table. ▶ Always quote this information when you contact a Hilti representative or Hilti Service to enquire about the product.
- Page 7 Product information Type: Generation: Serial number: 2 Safety 2.1 Safety instructions The safety instructions listed in the following section include all general safety instructions for power tools which, in accordance with the applicable standards, require to be listed in the operating instructions. Accordingly, some of the instructions listed may not be relevant to this power tool.
- Page 8 ▶ If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care ▶ Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
- Page 9 Accordingly, use a suitable vacuum cleaner of the type recommended by Hilti for wood dust and/or mineral dust and which is designed for use with this power tool. Ensure that the workplace is well ventilated. Observe national regulations applicable to the materials you intend to work with.
- Page 10 3.4 Items supplied Drywall screwdriver, depth gauge, bit, bit holder, operating instructions Note You can find other system products approved for use with your product at your local Hilti Center or online at: www.hilti.com. 3.5 Depth gauge The depth gauge is attached to the screwdriver by way of a snap-on connection and can be simply pulled off or pushed on.
- Page 11 3.9 Belt hook Using the belt hook, the drywall screwdriver can be carried conveniently, close to the body, on a belt. The belt hook can be fitted to allow attachment on the left or right side of the body. 3.10 Universal hook The universal hook allows the screwdriver to be put aside or stored temporarily in a number of different ways.
- Page 12 5.3 Fitting the belt hook in the alternative position 1. Press both battery release buttons simultaneously and pull the battery out of the screwdriver. 2. Unscrew both belt hook retaining screws. 3. Bring the belt hook and threaded piece into place on the other side of the tool. 4.
-
Page 13: Troubleshooting
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare parts, consumables and accessories approved by Hilti for use with the product can be found at your local Hilti Center or online at: www.hilti.com ▶... - Page 14 Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The materials must be correctly separated before they can be recycled. In many countries, your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
- Page 15 Hilti = registered trademark of Hilti Corp., Schaan Pos. 3 | 20150723...