Setting
Setting
The projector has Setting function, you can
select other functions as described below.
Menu operation
Press < MENU > button on the remote control
or on the top control panel to display the OSD
menu. Press button to select the setting
menu, then press <OK> or button.
1. Press button to select required item.
2. Press <OK> button.
3. Press button to set options.
Direct power on
Set the power mode ON, when the power cord
is connected to a power outlet.
1. Press button to select [ Direct power
on ] menu.
2. Press <OK> button.
3. Press button to select required item.
Get into standby mode.
Off
Start up immediately.
On
Standby mode
Set power consumption in standby mode, no
matter whenever your projector is operated
through network.
1. Press button to select [ Standby
mode ] menu.
2. Press <OK> button.
3. Press button to adjust levels.
Some function will be disabled
ECO
once your projector is in ECO
standby mode to reduce power
consumption. Network and RS-
232C serial communication
will be unavailable except the
POWER on command during that
mode.
Setting menu
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Direct power on
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
Standby mode
Setting
Direct power on
Standby mode
High land
Light source mode
Cooling fast
Closed caption
Key lock
Iris
Sound
HDMI Setup
www.infocus.com
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
Off
Eco
Off
Normal
Off
On
53