Auto Setup; Keystone - InFocus LightPro IN1004 User Manual

Expand

Auto setup

Press the AUTO button on your remote control
to execute the following functions: Input
search, Auto PC adj., and Auto keystone.
1. Press  button to select [ Auto setup ]
menu.
2. Press <OK> button.
3. Press  button to select required items.
Select this function to detect the
Input search
signal, then project images and
input signals automatically.
Select this function to adjust [ Fine
Auto PC adj.
sync ], [ H Position ], [ V Position ]
and [ H.Size ] automatically, when
projector input analogue signals.
Select this function to correct
Auto
vertical distortion of the projected

keystone

image automatically.
Keystone
Select this function to store or reset the
keystone or some related setting after
unplugging the AC power.
Press < MENU > button on the remote control
or on the top control panel to display the OSD
menu. Press  button to select the expand
menu, then press <OK> or  button to enter.
1. Press  button to select [ Keystone ]
menu.
2. Press <OK> button.
3. Press  button to select required item.
4. Press <OK> button.
Auto setup
Expand
Auto setup
Input search
Auto PC adj.
Auto keystone
Note
• One of input search, Auto PC
adj. and Auto keystone option
should be set to On at least.
• Please adjust the projector
manually, if the image is
displayed abnormal even if
you have select auto keystone
function.
• When you set Project way as
Ceiling / Front or Ceiling / Rear,
Auto keystone function is invalid.
• When you set Project way as
Auto ceiling / front or Auto
ceiling / rear, and users put their
projector in ceiling state, the Auto
keystone function will be invalid.
Keystone
Expand
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
www.infocus.com
On
On
Off
...
59