Project Way - InFocus LightPro IN1004 User Manual

Display
Project images at the aspect of
Wide
16:9.
Project images to the maximum.
Full
• Only for PC (VGA) signal input.
Splicing screen.
Advanced
• Only for PC (VGA) signal input.
1. Press  button to select [ Aspect ] menu.
2. Press <OK> button.
3. Press  button to select [ Advanced ]
menu.
4. Press <OK> button.
5. Press  button to select the required item.
Set the H total, and images will
H total
be vertical division by the set
value.
Adjustment range is from 1 to 5
of widescreen.
Set the V total, and images will
V total
be horizontal division by the set
value.
Adjustment range is from 1 to 5
of widescreen.
Set the projector in horizontal
Position H
position.
Adjustment range is from1 to the
current H total value.
Set the projector in horizontal
Position V
position.
Adjustment range is from1 to the
current V total value.

Project way

Select this function to set the placement or
installation of the projector.
Please change the settings in this menu
option, if the OSD displays inversely or
reversely.
Press < MENU > button on the remote control
or on the top control panel to display the OSD
menu. Press  button to select the Display
menu, then press <OK> or  button.
Project way menu
Display
Auto PC adj.
Fine sync
H position
V position
H.Size
Aspect
Project way
Menu position
Background display
System
www.infocus.com
Wide
Front
Upper left
Blue
46