Table of Contents
Advertisement
P
E
OWER OVER
THERNET
Power over Ethernet (PoE) switches provide the ability to detect attached Powered Devices (PD)
and deliver 48 VDC to the PD via existing CAT5 cabeling. The PoE devices are fully compliant
with the IEEE 802.3af Power over Ethernet standard. By default, the PoE switches discover and
provide power to IEEE compliant PDs.
To disable power detection and supply, use the power inline never command in the CLI. To
disable power detection and supply from the GUI, select the Ports page. Then select a single port
from the list (e.g., eth 0/1). This will bring up the port detail page for eth 0/1. On this page, there is
a check box to enable power detection.
C
Y
A
ONFIGURE
OUR
PPLICATION
More detailed documentation for configuring your ADTRAN unit is provided on the AOS
Documentation CD included in your shipment. For more detail on hardware setup, refer to the
appropriate NIM quick start guides and the hardware installation guide. For more detail on
configuring your system, refer to the AOS Command Reference Guide, configuration guides, and
technical support notes.
4
Copyright © 2008 ADTRAN, Inc. All Rights Reserved.
Advertisement
Table of Contents
Need help?
Do you have a question about the NETVANTA 1224 POWER OVER ETHERNET Series and is the answer not in the manual?