Removing & Installing Body Components; Battery - Honda Gold Wing 2021 Manual

Removing & Installing Body Components

Battery

❙
Removal
Make sure the ignition switch is turned to
OFF.
After turning the ignition switch OFF, wait
more than 60 seconds and then remove the
negative cable of the battery. Because the
electrical system may not function
correctly.
1. Remove the left side cover.
2. Disconnect the negative - terminal
from the battery.
3. Disconnect the positive + terminal from
the battery.
Except GL1800BD/D/DA Canada model
Positive + terminal
Negative - terminal
GL1800BD/D/DA Canada model
Negative - terminal
P. 170
2
4. Remove the battery holder bolt.
5. Swing the battery holder as shown to
avoid interference against the seat.
6. Remove the battery holder from the
hook.
Positive + terminal
7. Remove the battery taking care not to
drop the terminal nuts.
Battery holder
Battery holder bolt
Hook
Battery holder
continued 167