Settings - Alarm - Wavecom W40PC Manual

You may set up to ten different path and filename settings. These are used so the user can
quickly change the save filenames when changing frequencies. When you change your receiver
to another frequency, simply select the correct choice button on the left to use the new
filename settings.
Settings – Alarm
The AlarmMonitor allows you to scan for up to ten different alarm strings at the same time.
You may assign a different audible alert to each alarm string. When the AlarmMonitor has
detected an alarm string you will hear it immediately.
Proceed as follows:
Please
Without sound hardware, you can only hear the default beep regardless of the WAV file
settings. If you leave the filename blank, or give an incorrect filename, you will hear the
default WINDOWS sound.
Remember:
You may record your own WAV files. In this way the computer can play "World Cup" for an
alarm.
WAVECOM Decoders v6.15 W40PC, W41PC, W51PC
5. Select a folder using the browse button on the right.
6. Press the numbered button on the left to see the current save paths
at the bottom for that choice.
•
Enter an alarm string. (max. 50 characters)
•
Select a WAV file using the browse button on the right.
•
Check the "Enable scan" box to enable that alarm string.
•
Select the "Match case" box if you wish the alarm strings to be
case sensitive.
•
Deselect the "Sound audible alert" box to disable all audible alerts.
note:
AlarmMonitor • 223