Advanced Adjustments [Adjustment Menu]; To Select An Appropriate Mode For Images - Eizo FlexScan S2100 User Manual

Advanced Adjustments [Adjustment menu]

Independent setting and saving of color adjustment are available for each
FineContrast mode.
●

To select an appropriate mode for images

✓ : Adjustment/setting available
Icon Function
Brightness
Temperature
Gamma
Saturation
Hue
Gain
Reset
Menu Description
Brightness To adjust the full screen
brightness as desired
NOTE
• You can also adjust the brightness by pressing
Press
Temperature To select a color
temperature
NOTE
• The values shown in the Kelvin (K) are available only as
reference.
• The setting automatically turns "OFF" if a value under 4,000K
or over 10,000K is set.
Gamma To set a gamma value
NOTE
• Digital signal input is recommended for gamma value setting.
Saturation To adjust color saturation
Attention
• This function does not enable to display every color gradation.
Hue To change the fl esh color,
etc.
Attention
• This function does not enable to display every color gradation.
Gain To adjust red, green, and
blue to a desired color tone
respectively
NOTE
• Values shown in percentage are available only as reference.
• The <Temperature> setting invalidates this setting. The
<Gain> setting returns to the default setting.
−: Factory setting
FineContrast mode
Custom sRGB Text
✓ ✓ ✓
✓ ✓
−
✓ ✓
−
✓ − ✓
✓ ✓
−
✓
− −
✓ − ✓
Adjustment range
0 to 100%
after adjustment.
4000K to 10000K in units of 500K
(including 9300K).
1.8/2.0/2.2
–128 to 127
Setting the minimum (–128) turns
the image to a monochrome
screen.
–32 to 32
0 to 100%
Adjust the respective brightness of
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
Attention
• Perform [Range Adjustment] before
starting color adjustment for analog
input signals.
Refer to "To adjust color gradation
automatically" on page 12.
• The FineContrast mode cannot be
changed during color adjustment. Set
the FineContrast mode in advance
with
Picture Movie
• Wait 20 minutes or more from
✓ ✓
monitor power on before starting the
color adjustment.
✓ ✓
(It takes about 20 minutes for stable
operation of internal electronic
− −
components.)
✓ ✓
• Choose [Reset] from the Color menu
to revert to the default setting (factory
✓ ✓
setting) of the color tone of the
FineContrast mode selected.
− −
• The same image may be seen in
different colors on multiple monitors
✓ ✓
due to their monitor-specifi c
characteristics. Make fi ne color
adjustment visually when matching
colors on multiple monitors.
or .
NOTE
• The Adjustment menu and the
FineContrast mode name cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of FineContrast mode.
Chapter 2 Settings and Adjustments
.
15