EIZO NANAO CORPORATION’s receipt of said information Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO monitor specifi cations are subject to change without notice.
• To ensure personal safety and proper maintenance, please read carefully this section and the caution statements on the monitor. [Location of Caution Statement] WARNING...
Page 4
WARNING Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in injury or equipment damage. If the unit falls, disconnect the power immediately and ask your dealer for advice. Do not continue using a damaged unit.
Page 5
WARNING Handle the power cord with care. • Do not place the cord underneath the unit or other heavy objects. • Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Use of a damaged cord may result in fi re or electric shock.
Page 6
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit fi rmly with both hands ensuring the panel faces outward before lifting.
LCD Panel In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brightness is recommended. The screen may have defective pixels. These pixels may appear as slightly light or dark areas on the screen. This is due to the characteristics of the panel itself, and not the product defect.
To turn off the Power indicator while a screen is displayed [Power Indicator Setting] ... 18 ● To display EIZO logo [EIZO Logo Appearing Function] ... 18 CONTENTS Locking Buttons ... 18 ● To lock operation [Adjustment Lock] ... 18 Setting Adjustment menu Display ...
• FineContrast mode to allow the best mode for screen display • The utility software “ScreenManager Pro for LCD” (for Windows) to control the monitor from a PC with mouse/keyboard is included (refer to the EIZO LCD Utility Disk). • Height adjustable stand •...
FineContrast mode Color Adjustment Simple Adjustment [FineContrast mode] This function allows easy selection of a desired mode from fi ve modes according to monitor application. Brightness Adjustment Press to adjust brightness. Chapter 1 Features and Overview...
Locking Adjustment ● [Adjustment Lock] to lock operation of the monitor EIZO Logo Display Setting ● [EIZO Logo Appearing Function] to display or not to display the EIZO logo Connecting Cables ● 3-1 Connecting Two PCs to the Monitor ●...
Chapter 2 Settings and Adjustments 2-1 Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. ● Disk contents and software overview The disk includes a monitor information file, application software programs for adjustment, and User’s Manual.
• Advaced Adjustment Run the Screen Adjustment Program. Load the EIZO LCD Utility Disk on the PC, and start the Screen Adjustment Program compatible with the PC in use. After the program starts up, perform the adjustment in step 4 following the instructions of the program.
Page 14
To correct screen position [Position] Since the number of pixels and the pixel positions are fi xed on the LCD monitor, only one position is provided to display images correctly. The position adjustment is made to shift an image to the correct position.
Page 15
Adjust the signal output range ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. (1) Choose <Range Adjustment> from the <Screen> menu, and press A message “Your setting will be lost it you press AUTO button” appears. (2) Press while the message is displayed.
2-3 Color Adjustment Simple adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. ● FineContrast Mode An appropriate display mode is selectable out of fi ve modes. Mode Custom Available for making desired setting.
• The FineContrast mode cannot be changed during color adjustment. Set the FineContrast mode in advance with • Wait 20 minutes or more from monitor power on before starting the color adjustment. (It takes about 20 minutes for stable operation of internal electronic components.) •...
● To set monitor power-off time [Off Timer] This function allows the monitor to automatically turn off after a specifi ed time has passed. This function serves to reduce afterimages caused when the monitor screen is left on for a long time period without use. Use this function when an image is displayed throughout the day.
2-5 Screen Size Selection ● To change screen size [Screen Size] This function allows you to change the screen size when a low-resolution image is displayed. Menu Displays an image in full screen. Images are distorted in Full (default setting) some cases because the vertical rate is not equal to the horizontal rate.
● To display EIZO logo [EIZO Logo Appearing Function] When this unit is turned on, the EIZO logo appears at the center of the screen. Selection to display or not to display the logo is available with this function. [Procedure] (1) Press to power off the unit.
2-8 Setting Adjustment menu Display ● To update menu settings [Menu Size/Menu Position/ Menu Off Timer/Translucent/Orientation] Menu Size Change the Adjustment menu size using the following procedure. (1) Choose <Others> from the Adjustment menu, and press (2) Choose <Menu Settings> from the <Others> menu, and press (3) Choose <Menu Size>...
, and press , and press , and press NOTE • The usage time is not always “0” when you purchase the monitor due to factory inspection. NOTE • For default settings, refer to “Main default settings (factory settings)” on...
Chapter 3 Connecting Cables 3-1 Connecting Two PCs to the Monitor Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the back of the monitor. Connection examples DIV-I connector (SIGNAL1)
(3) Supplied EIZO USB cable (MD-C93) ● Connection Procedure (Setup of USB Function) (1) Connect the monitor fi rst to a PC using the signal cable, and run the PC. (2) Connect the supplied USB cable between the downstream USB port of a USB compatible PC (or another USB hub) and the monitor’s upstream USB port.
Possible cause and remedy • Check whether the power cord is connected correctly. If the problem persists, turn off the monitor, and then turn it on again a few minutes later. • Check brightness setting. • Turn on the PC.
Page 26
• This is due to LCD panel characteristics and is not a failure. • Leave the monitor with a white screen. The symptom may disappear. • Select 1 to 4 in <Signal Filter> from the <Screen> menu to change the mode.
5-1 Attaching an Arm (Option) The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. [Attaching] Hold the upper and lower centers of the stand joint cover, and slide sideways to remove it.
5-2 Cleaning Clean the monitor periodically to keep the monitor clean and extend its life. Cabinet Clean the cabinet with a soft cloth dampened with little mild detergent. LCD Panel • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.
5-4 Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display.
Resolution The LCD panel consists of numerous pixels of specifi ed size, which are illuminated to form images. The EIZO S2100 monitor consists of 1600 horizontal pixels and 1200 vertical pixels. At a resolution of 1600 × 1200, all pixels are illuminated as a full screen (1:1).
5-5 Preset Timing The following table shows factory preset video timing. Mode Dot clock VGA 640×480@60Hz 25.2 MHz VGA 720×400@70Hz 28.3 MHz Macintosh 640× 30.2 MHz 480@67Hz Macintosh 832× 57.3 MHz 624@75Hz Macintosh 1152× 100.0 MHz 870@75Hz Macintosh 1280× 126.2 MHz 960@75Hz PC-9801 640×400@56Hz 21.0MHz...
Page 34
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.
Changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note Use the attached specifi ed cable below or EIZO signal cable with this monitor so as to keep interference within the limits of a Class B digital device. - AC Cord...
Page 36
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 1600 × 1200 RGB analog, 0,7 Vp-p und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
Page 37
Recycle Auskunft Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer: 02153-73 35 00.