MCL Ironless Linear Motors
13.7
Electrical connection
Connect the motor electrically according to the connection diagrams and the
instructions in
chapter 8 "Connection technique" on page
references to supplementary documentation.
●
When using self-manufactured cables, ensure EMC-compli‐
ant design and installation.
●
Where applicable, ensure that connectors and lines are fas‐
tened for strain relief purposes.
●
The connection diagrams of the product documentation
serve to create system circuit diagrams. Only the machine
manufacturer's system wiring diagrams are relevant for the
connection of the drive components in the machine.
83. Refer to the
R911330592_Edition 06 Bosch Rexroth AG
165/197
Assembly