Cadillac XT4 Owner's Manual page 80

head restraint and route the
tether under the headrest or
head restraint and around the
headrest or head restraint posts.
If the child restraint is installed
next to a centre seat, make sure
the top tether does not interfere
with the centre seating position
shoulder belt/retractor. If it does,
find another suitable seating
position to install the child
restraint.
3. Make sure the child restraint top
tether hook is completely closed
and secured to the top tether
anchor.
Head Restraint Removal and
Reinstallation
The rear outboard head restraints can
be removed if they interfere with the
proper installation of the child
restraint.
To remove the head restraint:
1. Partially fold the backrest forward.
See Rear Seats 0 47 for additional
information.
2. Press both buttons on the head
restraint posts at the same time,
and pull up the head restraint.
3. Store the head restraint in a secure
place.
4. When the child restraint is
removed, reinstall the head
restraint before the seating position
is used.
Warning
With head restraints that are not
installed and adjusted properly,
there is a greater chance that
occupants will suffer a neck/spinal
SEATS AND RESTRAINTS
Warning (Continued)
injury in a crash. Do not drive until
the head restraints for all occupants
are installed and adjusted properly.
To reinstall the head restraint:
1. Insert the head restraint posts into
the holes in the top of the backrest.
The notches on the posts must face
the driver side of the vehicle.
2. Push the head restraint down.
If necessary, press the height
adjustment release button to
further lower the head restraint.
See Head Restraints 0 38.
79