Maps; Navigation Symbols - Cadillac XT4 Owner's Manual

150 INFOTAINMENT SYSTEM

Maps

The Nav application requires a map
database to run. It is stored on an SD
card that is connected to the
infotainment system. If the map
database is not available, a missing SD
card error message will be displayed.
SD Card Error Messages
The SD card only works for one
unique vehicle. The SD card must pass
authentication verification to be used
for that specific vehicle. Do not
remove the SD card while the ignition
is on.
Potential error scenarios and
messages include:
The SD card has initialised for the
first time: Once initialised, this SD
card can only be used for navigation
in this vehicle. Make sure the SD
card switch is in an upward
position.
The SD card is not working
properly: SD card is not functioning
properly. (Error Code).
The SD card is not paired with the
existing system: This Nav SD card
is not valid in this vehicle for
navigation. See Owner's Manual for
more details or visit your dealer.
(Error Code).
The SD card has been removed from
the slot: SD card has been removed.
(Error Code). Make sure the Nav SD
card is in the slot.
Touch Continue to resume after the
initialisation error message. For the
other messages, touch OK to return to
the Home Page.
If any errors continue, see your dealer.

Navigation Symbols

Following are the most common
symbols that appear in the Nav
application.
This indicates the vehicle's current
location and direction on the map.
This is the vehicle's current location
icon during inactive guidance mode.
Once a user profile is created, the
current location icon can be
customised.
This icon indicates the vehicle's
current location and direction on
the map.
The destination pin marks the
location of the final destination.
Touch the pin to view the destination
address or to add it or remove it from
the Favourites list. Hide the
information by touching the pin one
more time. It will automatically time
out if no action is taken.