Driver Mode Control - Cadillac XT4 Owner's Manual

If comes on and stays on:
1. Stop the vehicle.
2. Turn the engine off and wait
15 seconds.
3. Start the engine.
Drive the vehicle. If comes on and
stays on, the vehicle may need more
time to diagnose the problem. If the
condition persists, see your dealer.
Turning the Systems Off and On
Caution
Do not repeatedly brake or
accelerate heavily when TCS is off.
The vehicle driveline could be
damaged.
To turn off only TCS, press and
release . The Traction Off light
displays in the instrument cluster and
a DIC message may display.
To turn TCS on again, press and
release . The Traction Off light
displayed in the instrument cluster
will turn off and a DIC message may
display.
If TCS is limiting wheel spin when
is pressed, the system will not turn off
until the wheels stop spinning.
To turn off both TCS and StabiliTrak/
ESC, press and hold until the
Traction Off light and StabiliTrak/
ESC Off light come on and stay on
in the instrument cluster. A DIC
message may display.
DRIVING AND OPERATING
To turn TCS and StabiliTrak/ESC on
again, press and release
Traction Off light and StabiliTrak/
ESC Off light in the instrument
cluster turn off and a DIC message
may display.
Adding accessories can affect vehicle
performance. See Accessories and
Modifications 0 286.

Driver Mode Control

Driver Mode Control (DMC) allows the
driver to adjust the overall driving
experience to better suit driver
preferences by adjusting vehicle
systems. Drive mode availability and
affected vehicle systems are
dependent on vehicle trim level,
region, and optional features.
If the vehicle is in Tour or AWD
Mode, it will stay in that mode
through future ignition cycles. If the
vehicle is in any other mode, it will
return to Tour Mode when the vehicle
is restarted. When a mode is selected,
an indicator will illuminate in the
instrument cluster and remain
illuminated.
225
. The